Cabletron Systems brim f6 brim-f6 Manual De Usuario
Chapter 3: Local Management
3-18
HSIM-F6 User’s Guide
3.7.2
Ring Map Configuration Screen Commands
The following list describes each of the Ring Map Configuration screen
commands:
commands:
Address Mode [ ]
The Address Mode command allows the user to switch between canonical
and MAC format addresses. To toggle between the two address modes,
press the SPACE bar.
and MAC format addresses. To toggle between the two address modes,
press the SPACE bar.
SCROLL DOWN
n
The Scroll Down n command rotates the ring display, so that the station
addresses shift around the ring in a clockwise direction. The n controls the
number of shifts downstream of the HSIM-F6.
addresses shift around the ring in a clockwise direction. The n controls the
number of shifts downstream of the HSIM-F6.
SCROLL UP
n
The Scroll Up n command rotates the ring display, so that the station
addresses shift around the ring in a counterclockwise direction. The n
controls the number of shifts upstream of the HSIM-F6.
addresses shift around the ring in a counterclockwise direction. The n
controls the number of shifts upstream of the HSIM-F6.
3.7.2.1
Adjusting the Scroll Number (
n)
When using the SCROLL DOWN n or SCROLL UP n commands, the n
allows the user to control the number of shifts made with each command
execution.
allows the user to control the number of shifts made with each command
execution.
To set the number (n) of scrolls, perform the following steps:
1.
Using the ARROW keys, highlight the SCROLL DOWN n or
SCROLL UP n command.
SCROLL UP n command.
2.
Press the SHIFT and + keys (to increment) or the SHIFT and - keys (to
decrement) until the number of shifts desired displays.
decrement) until the number of shifts desired displays.
3.
Press ENTER. The ring map scrolls n number of shifts.
NOTE
When the ring map contains only one station, the
SCROLL UP
SCROLL UP
n and SCROLL DOWN n commands do not
appear.
NOTE
The scroll number remains the same until it is changed
manually, or the Local Management session is terminated.
manually, or the Local Management session is terminated.