Fujitsu image scanner fi-5950 Manual De Usuario

4

1. Place the scanner at its installation site.

For details on the scanner's dimensions and 

required installation space, refer to the fi-5950 

Operator’s Guide, chapter  "10. Scanner Specifi-
cations".

2. Connect the AC cable to the Power inlet of the 

scanner and plug it into an outlet.

     

  

Connect either using the USB or SCSI interface. 

■ Connecting the USB Interface

1. Connect the USB cable to the USB connector.

2. Connect the other end of the USB cable to 

your PC.    

3. Press the "I" side of the main power switch to 

turn on the scanner.

ATTENTION

•

The scanner weight is 50 kg (110 lb). 
Make sure two persons are available 
when moving the scanner.

•

When carrying the scanner, only grip the 
bottom side.

ATTENTION

Use only the power cable provided by the 
manufacturer.

HINT

The Function Number Display and the LED 
may flash for an instant when plugging the 
AC cable into the outlet. This is not a mal-
function. 

ATTENTION

This scanner is provided with two inter-
faces: Ultra SCSI and USB 2.0 /1.1. Con-
nect only one of the USB or SCSI cable. 

ATTENTION

•

Be sure to use the USB cable which 
comes with this scanner. Correct opera-
tion with commercially available cables 
is not guaranteed.

•

When connecting to a USB hub, use the 
first stage USB hub that is closest to the 
computer. If you use the second or later 
hub stages, the scanner may not oper-
ate correctly.

•

If you connect the scanner with USB 2.0, 
it is required that the USB port and Hub 
are compliant with USB 2.0. The scan-
ning speed may slow down if it is con-
nected with USB1.1.

ON

OFF