Bulldog Security deluxe 500 Manual De Usuario

18

1. Timer start can be exited manually as follows:

Make sure the engine is not running in remote start mode.

2. Turn the ignition key ON. The LED and parking lights will flash (4) times.

The horn chirps (4) times.

Or
1. Press the   button twice to remote start the vehicle. As soon as the

vehicle is running and the parking light have turned on or are flashing.

2. Immediately depress the   button, then press and hold the   button

for 2 seconds. The parking lights will flash (4) times. The siren or horn

chirps (4) times. The vehicle is no longer programmed to start automatically.

You can monitor through the LCD screen, the present interior

temperature of the passenger compartment before cooling or

heating your vehicle. Press the transceiver SET button first,

within 3 seconds press the   ( ) button; the interior temp-

erature will be shown on the LCD screen. This reading may be

higher than actual ambient temperature due to the greenhouse

effect and is relative only the inside vehicle temperature.

When the engine is running (in remote start mode), to shut the

engine off: Press the   button twice on the remote transmitter.

Move the optional remote start enable toggle switch to the

“OFF” position. (If installed) Press the brake pedal. Release the

emergency brake. (for Standard Transmission Vehicle) The

vehicle will shut down and turn off the parking lights to indicate

engine has stopped.