Bulldog Security deluxe 500 Manual De Usuario

. .

OPERATION

H. SILENT ARMING / DISARMING: Pressing the transmitters and

buttons at the same time will arm or disarm your security system, No chirping

sound will be heard, arm / disarm confirmation will be through the vehicles

parking lights only.

I. PASSIVE STARTER DISABLE:

The purpose of this feature is to protect the vehicle from being stolen at all

times, regardless of whether or not the alarm is armed.

The vehicles starter will be disable 60 seconds after the ignition is turned

off. Once the key is turned off, the LED will flash fast for 60 seconds.

After the 60-second timer has elapsed, the LED will flash slowly (one-half

its normal armed rate) to indicate the passive starter disable is activated

and the system will not respond to any trigger input except the ignition

trigger.

J. PASSIVE ARMING

Active arming / disarming is controlled by your security systems remote

transmitter. The security system is equipped with an optional Passive

Arming feature, which allows the security system to arm 30 seconds after

the last door is closed. Operation is as follows.

1. Turn the ignition key to the OFF position and exit the vehicle.

2. After all doors are closed, the security systems LED will flash fast for 30

seconds. If you re-open any door, hood or truck, the security systems

LED will stop flashing. It will begin flashing again once these are closed.

3. After the 30-second timer has elapsed, the security system will automatically

ARM. The siren will chirp [1] time and the parking lights will flash [1]

time and then remain ON for 10 seconds.

PASSIVE ARMING WITH PASSIVE DOOR LOCKING:

The vehicles doors will automatically lock after the passive arming cycle has

been completed.

PASSIVE ARMING BY-PASS: While the system disarmed, Press the

button twice, the security system will respond with [1] chirp and LED will

turn ON. The security system will remain in this temporary state for as

long as you wish. To exit passive by-pass, press the transmitters or

buttons and the system will return to normal status.