caddx nx-4 Manual
15
SERVICE MENU
The
service light
will be “on” if the security system requires service. If the
service
light
is “on”, press the [
U
] key followed by the [2] key to determine the service
condition. One or more zone lights will illuminate indicating what service(s) is
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
LIGHT
PROBLEM
SYSTEM FAULT - Press the [1] key. The
zone light(s)
that is
illuminated corresponds to the system fault(s) below:
1
Over Current Fault
2
Siren Trouble
3
Box Tamper
4
Expander Power
5
Expander Low Battery
6
Expander Box Tamper
7
Expander Trouble
8
Reserved
1
Press the [#] key to return to the 1 of 8
service lights
.
2
ZONE TAMPER - Press the [2] key and the
zone light(s)
will
illuminate showing the zone(s) that are tampered. Press the [#] key
to return to the 1 of 8
to return to the 1 of 8
service lights
.
3
ZONE LOW BATTERY - Press the [3] key. The
zone light(s)
will
illuminate showing which zone(s) has a low battery. This only
applies to wireless zones. Press the [#] key to return to the 1 of 8
applies to wireless zones. Press the [#] key to return to the 1 of 8
service lights
.
4
ZONE LOSS OF SUPERVISION - Press the [4] key and the
zone
light(s)
will illuminate showing which zone(s) has loss of
supervision. This only applies to wireless zones. Press [#] key to
return to the 1 of 8
return to the 1 of 8
service lights
.
5
ZONE TROUBLE - Press the [5] key and the
zone light(s)
will
illuminate showing which zone(s) has a trouble condition. Press the
[#] key to return to the 1 of 8
[#] key to return to the 1 of 8
service lights
.
6
RESERVED.
7
FAILURE TO COMMUNICATE - This light will illuminate when there
is a failure to communicate between your system and the central
station.
station.
8
LOSS OF SYSTEM TIME - This light will illuminate when there has
been a loss of power and your system clock needs to be reset.
Instructions are on page 13.
Instructions are on page 13.
EXIT
Press the [#] key to exit the Service Light mode.