Panasonic DP-C354 Guía De Operación
34
Chapter 2 Basic Fax Transmission
Verification Stamp
This function confirms successful transmission, or storage
into the memory by stamping at the bottom of each
successfully transmitted original(s) with a small “x” mark.
into the memory by stamping at the bottom of each
successfully transmitted original(s) with a small “x” mark.
z
The scanned document(s) are stamped after feeding through
the ADF.
the ADF.
z
The standard setting of the verification is “Off”. The stamp
setting can be changed with “04 Stamp (HOME)” in Function
Parameters (Fax/Email Settings> Fax Parameters). For
instructions on how to change the standard setting, refer to Fax/Email Settings in the Operating Instructions
(For Function Parameters) on the provided CD-ROM.
setting can be changed with “04 Stamp (HOME)” in Function
Parameters (Fax/Email Settings> Fax Parameters). For
instructions on how to change the standard setting, refer to Fax/Email Settings in the Operating Instructions
(For Function Parameters) on the provided CD-ROM.
z
The machine can be configured not to stamp the documents stored in the memory by changing the setting
“28 Stamp at Memory XMT” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions
on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For
Function Parameters) on the provided CD-ROM.
“28 Stamp at Memory XMT” in Function Parameters (Fax/Email Settings> Fax Parameters). For instructions
on how to configure the verification stamp, refer to Fax/Email Settings in the Operating Instructions (For
Function Parameters) on the provided CD-ROM.
z
Verification Stamp function is only available scanning documents with the ADF.
z
Because the verification stamp cannot be deleted, be careful not to use the verification stamp when
transmitting important document(s).
transmitting important document(s).
1
Place Original(s).
z
Refer to Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
Fax) in the Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Fax key.
3
Select “Basic Menu”.
4
Select “Verification Stamp”.
5
Set “Quality Adj.” as required.
z
6
Select “Address Book”, and then
select a destination.
select a destination.
z
7
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.
file number. Then starts dialling the telephone
number.
z
The setting of the “Verification Stamp” is
returned to the “Off” position after the
transmission is completed.
returned to the “Off” position after the
transmission is completed.
Verification Stamp
Ex: Scanning
Direction