Hitachi CP-A300NM Manual De Usuario

74

SECURITY menu

If this function is set to ON when the vertical angle of 
the projector or MIRROR setting at which the projector 
is turned on is different than the previously recorded, the 
TRANSITION DETECTOR ON alarm will be displayed 
and the projector will not display the input signal.
• To display the signal again, set this function OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON 
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector function is on.

1-1  Use the ▲/▼ buttons on the SECURITY menu 

to select TRANSITION DETECTOR and press 
the ► or the ENTER button to display the 
TRANSITION DETECTOR on/off menu.

1-2  Use the ▲/▼ buttons on the TRANSITION 

DETECTOR on/off menu to select ON. Select 
ON and the current angle and MIRROR 
setting will be recorded. The ENTER NEW 
PASSWORD box (small) will be displayed.

1-3  Use the ▲/▼/◄/► buttons to enter a 

password. Move the cursor to the right side 
of the ENTER NEW PASSWORD box (small) 
and press the ► button to display the NEW 
PASSWORD AGAIN box, enter the same 
password again.

1-4  Move the cursor to the right side of the  

NEW PASSWORD AGAIN box and press  
the ► button to display the NOTE NEW  
PASSWORD box for about 30 seconds,  
please make note of the password during this time.

Pressing the ENTER button on the remote control or the ► button on the 
projector will return to the TRANSITION DETECTOR on/off menu.

• Please do not forget your TRANSITION DETECTOR password.
• This function will activate only when the projector is started after turning off 
the AC power.
• This feature may not function properly if the projector is not in a stable 
position when ON is selected.

2-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
2-2  Select OFF to display the ENTER 

PASSWORD box (large). Enter the registered 
password and the screen will return to the 
TRANSITION DETECTOR on/off menu.

If an incorrect password is input, the menu will 
close. If necessary, repeat the process from 2-1.

3-1  Follow the procedure in 1-1 to display the TRANSITION DETECTOR on/off menu.
3-2  Select OFF to display the ENTER PASSWORD box (large). The 10 digit 

Inquiring Code will be displayed inside the box.

3-3  Contact your dealer with the 10 digit Inquiring Code. Your password will 

be sent after your user registration information is conrmed.

(continued on next page)

ENTER NEW PASSWORD 

box (small)

ENTER PASSWORD box 

(large)