Panasonic KX-FLB881 Guía De Operación
1. Introduction and Preparation
11
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Initial Programming
1.9 Date and time
1
{
MENU} i {#}{1}{0}{1} i {SET}
M:
|
01/D:01/Y:07
TIME: 12:00AM
2
Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
selecting 2 digits for each.
Example: August 10, 2007 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{7} {1}{0} {1}{5}.
M:
|
08/D:10/Y:07
TIME: 10:15AM
2. Press {*} repeatedly to select “
PM”.
3
{
SET}
4
Press {MENU} to exit.
1.10 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
so that it appears on the top of each page sent.
1
{
MENU} i {#}{1}{0}{2} i {SET}
LOGO=
|
2
Enter your logo, up to 30 characters using the dial
keypad. i {SET}
keypad. i {SET}
3
Press {MENU} to exit.
1.11 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
the top of each page sent.
1
{
MENU} i {#}{1}{0}{3} i {SET}
NO.=
|
2
Enter your fax number, up to 20 digits.
L
To enter a “
+”, press {*}.
L
To enter a space, press {#}.
L
To enter a hyphen, press {FLASH}.
L
To erase a number, press {STOP}.
3
{
SET}
4
Press {MENU} to exit.
1.12 Configuring the unit to
access the LAN
access the LAN
You can print documents, scan documents, receive
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
faxes or send faxes using a computer on the LAN. To
enable these features, you need to set the IP address,
subnet mask, and default gateway for the unit.
Important:
L
Consult your network administrator when setting
the IP address, subnet mask, and default
gateway.
the IP address, subnet mask, and default
gateway.
1.12.1 Setting up automatically with a
DHCP server
DHCP server
Your situation:
–
–
When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1
After connecting the LAN cable to the unit and the
computer, connect the power cord.
computer, connect the power cord.
L
The IP address, subnet mask, and default
gateway will be set automatically.
gateway will be set automatically.
2
Install Multi-Function Station on the computer that
you want to use it with.
you want to use it with.
1.13 Installing Multi-Function
Station
Station
L
Install Multi-Function Station (CD-ROM) before
connecting the unit to a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
connecting the unit to a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
L
Software features and appearance are subject to
change without notice.
change without notice.
Warning:
L
To assure continued emission limit compliance;
–
–
use only shielded USB cable.
–
use only shielded LAN cable (category 5 straight
cable).
cable).
1
Start Windows
®
and exit all other applications.
L
For Windows 2000, Windows XP and Windows
Vista™ operating system users, you must be
logged in as an administrator in order to install
Multi-Function Station.
Vista™ operating system users, you must be
logged in as an administrator in order to install
Multi-Function Station.
2
Insert the supplied CD-ROM into your CD-ROM
drive.
drive.
3
[
Easy installation]
L
The installation will start.
4
When the setup program starts, follow the on-screen
instructions.
instructions.
5
The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
L
The [Connect Device] dialog box will appear.
FLB881-PFQW2652ZA-QRG-en.book Page 11 Friday, July 20, 2007 4:11 PM