Panasonic DPMC210 Guía De Operación
2
When using the automatic document feeder:
MStartN (DP-MB350)/MBlackN or MColorN (DP-MC210)
MStartN (DP-MB350)/MBlackN or MColorN (DP-MC210)
R The scanned image will be automatically saved in the selected folder on the network.
7 After you finish scanning, press MStopN to reset the settings you set in step 5.
Note:
R You can save the images in TIFF, JPEG or PDF formats.
R If this function does not perform properly, consult your network administrator. This unit’s SMB function does not
R You can save the images in TIFF, JPEG or PDF formats.
R If this function does not perform properly, consult your network administrator. This unit’s SMB function does not
support NTMLv2 and SMB signatures.
<Change Functions>
<Reference list>
You can print out the SMB folder list for your reference.
1 {Menu}
2 Press MCN or MDN repeatedly to select “Print Report”.
3 Press {FN or ME} repeatedly to select “SMB Folder List”.
4 Press {Set} to start printing. A {Menu}
You can print out the SMB folder list for your reference.
1 {Menu}
2 Press MCN or MDN repeatedly to select “Print Report”.
3 Press {FN or ME} repeatedly to select “SMB Folder List”.
4 Press {Set} to start printing. A {Menu}
<Specifications>
Scan to SMB folder memory capacity: 5 MB in total
Scan to SMB folder memory capacity: 5 MB in total
2.1.2 Holding the previous scan setting temporarily (Push scan)
The previous scan setting will be kept for about 1 minute after scanning. To reset the scan setting, press {Stop}.
2.2 Fax features
2.2.1 Quick scan
Erasing all email addresses,
FTP destinations, and SMB
folder destinations stored in
the unit
MBNM5NM7NM8N
FTP destinations, and SMB
folder destinations stored in
the unit
MBNM5NM7NM8N
M0N “No” (default)
M1N “Yes”
R Disconnect the telephone line cord, USB cable and LAN cable before
M1N “Yes”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all email addresses:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M1N to select “Yes”. A MSetN A MMenuN
To erase FTP destinations:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M0N to select “No”. A MSetN
4. Press M1N to select “Yes”. A MSetN A MMenuN
To erase SMB folder destinations:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M0N to select “No”. A MSetN
4. Press M0N to select “No”. A MSetN
5. Press M1N to select “Yes”. A MSetN A MMenuN
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M1N to select “Yes”. A MSetN A MMenuN
To erase FTP destinations:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M0N to select “No”. A MSetN
4. Press M1N to select “Yes”. A MSetN A MMenuN
To erase SMB folder destinations:
1. MMenuN A MBNM5NM7NM8N
2. Press M1N to select “Yes”. A MSetN
3. Press M0N to select “No”. A MSetN
4. Press M0N to select “No”. A MSetN
5. Press M1N to select “Yes”. A MSetN A MMenuN
Setting the quick scan mode
MBNM4NM1NM9N
MBNM4NM1NM9N
M0N “Off” (default): Deactivates this feature.
M1N “Always”: The unit will scan the document and store it into memory first,
then the unit will start sending the documents. You can send faxes without
activating quick scan.
M1N “Always”: The unit will scan the document and store it into memory first,
then the unit will start sending the documents. You can send faxes without
activating quick scan.