Honeywell Lyric Round™ 2.0 Manual De Propietario
70-0568
Rev. 07-17
ENVIRONMENTAL AND ENERGY SOLUTIONS
WARRANTY POLICY
Honeywell warrants the products in this catalog (except those parts designated on Honeywell's price lists as not covered by this warranty) to be free from defects due to
workmanship or materials, under normal use and service, for the following warranty periods.
Sixty (60) months from date of installation
Sixty (60) months from date of installation
• Prestige
®
, Prestige
®
IAQ, Lyric™ Round Thermostat,
Lyric™ T6, T6 Pro, T5 Series, VisionPRO
®
,
Commercial VisionPRO
®
, CommercialPRO
®
,
FocusPRO
®
, Wireless FocusPRO
®
, PRO 4000, PRO
3000, LineVoltPRO™, Digital Round™, and Modern
Round ™ (T87K, N) Series Thermostats with a date
code of 0501 or later
• Air Cleaners, Humidifiers, Ventilators, Ultraviolet
Treatment, Indoor Air Quality, and Zoning products
with a date code of 0501 or later, excluding
replacement maintenance parts
• MS, MN and fast acting 2-position Direct Couple
actuators; MVN rotary valve actuators
• Commercial Valves: VBN and VBF ball valves, and
VRN pressure independent control valves
• JADE economizer when used with Honeywell
sensors and actuators
• AquaPUMP circulating pump
• C7189R RedLINK Wireless Indoor Air Sensor
• C7061 UV Detector
Sixty (60) months from date of manufacture
• Access and Video Systems power supplies
Thirty-six (36) months from date of shipment
• Variable frequency drive devices (VFD) and
accessories
Thirty-six (36) months from date of installation
• AUBE branded thermostats, timers, and switches
• LCBS Connect controllers, wall modules and
gateways
Twenty-four (24) months from date of installation
• PRO 2000 and PRO 1000 thermostats
• Other Honeywell indoor air quality and zoning
products with a date code of 0452 or earlier, unless
otherwise specified
• AQ2000 Aquatrol panels and AQ1000 thermostats
• RedLINK Entry/Exit Remote
• RedLINK Vent Boost Remote
Twenty-four (24) months from date of manufacture
• Pan-Tilt-Zoom Domes for Access and Video
Systems
Eighteen (18) months from date of shipment
• All WEBs and Security controllers, unless specified
otherwise (warranty replacement parts will be
warranted for 90 days or the balance of the original
warranty period, whichever is longer)
Twelve (12) months from date of installation
• Water Solutions products
• RedLINK Wireless Outdoor Air Sensor
• RedLNK Portable Comfort Control
• RedLINK Internet Gateway
• Unitary controllers including Spyder, Stryker, and
Sylk IO modules
Twelve (12) months from date of shipment
• Building automation security accessories
The warranty period for all other products is twelve
(12) months from date of installation.
(12) months from date of installation.
If a product is defective due to workmanship or materials, is removed within the applicable warranty period, and is returned to Honeywell in accordance with the procedure
described below, Honeywell will, at its option, either repair, replace or credit the customer for the purchase price of the product, in accordance with the procedure described
below. This warranty extends only to persons or organizations who purchase products in this catalog for resale.
The expressed warranty above constitutes the entire warranty of Honeywell with respect to the products in this catalog and IS IN LIEU OF ALL OTHER WARRANTIES,
The expressed warranty above constitutes the entire warranty of Honeywell with respect to the products in this catalog and IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
HONEYWELL BE RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER.
INSTRUCTIONS—INSTALLING OR SERVICING
CONTRACTOR OR DEALER
When replacing a Honeywell product under warranty,
including those products furnished on original heating
and/or cooling equipment, you should rely on your
local Honeywell Wholesaler or Distributor for prompt
and efficient product replacement service.
No warranty claim for product replacement or credit
No warranty claim for product replacement or credit
will be honored by Honeywell without a completed
return authorization form or a manual return
authorization form issued by Honeywell Customer
Care.
INSTRUCTIONS—WHOLESALER OR
DISTRIBUTOR
The following will apply to the return of any product to
Honeywell under this warranty, except any products
which are not variable frequency drives or WEBS and
are:
(i) identified with a Honeywell Return
Authorization Form (obtained from the B2B
website at Customer.Honeywell.com)
(ii) display the Return Authorization Form
number and return address label on the
outside of the return carton. Make sure a
copy of the form is enclosed in the return
carton
(iii) packed separately from other returns and
protected from shipping damage;
(iv) have certification by the installer or servicing
dealer that the product was removed, due to
failure, within the applicable warranty period;
(v) are received transportation pre-paid at the
facility listed on the shipping and/or packing
slip.
(vi) and are found by Honeywell’s inspection to
be defective in workmanship or materials
under normal use and service
will be handled in accordance with one of the two
following procedures, as specified by the customer
making the return.
1. CREDIT PROCEDURE. Honeywell will issue
credit, at Honeywell’s lowest wholesaler net
price in effect at the time of the return (as set
forth on Honeywell’s then current price sheet)
or at the actual invoice amount if a copy of that
invoice is attached to the packing list.
(TRADELINE Replacement Exchange
Products will be at Honeywell’s lowest
replacement exchange net price in effect at the
time of such return, as shown on Honeywell’s
then current price sheet.) Honeywell reserves
the right to disallow this credit option in cases
of warranty abuse.
2. REPLACEMENT PROCEDURE. Warranty
replacement procedure must be used for in-
warranty emergency replacement orders.
Customer will not be credited for items not
meeting warranty criteria as outlined by policy.
Please return the defective item to the address
listed on the return authorization form.
List Water Solutions products on a separate Return
Goods Order form, marked “Water Solutions”.
All new and unused VBN control ball valves MUST be
approved by your Honeywell sales representative
before returned.
WEBs return products must be processed through
WEBs return products must be processed through
WEBs Customer Care. Defective hardware products
under warranty have to be returned to Tridium in
Richmond, VA. Security Access and Video products
must have prior authorization.
All VFD warranty return products must be coordinated
All VFD warranty return products must be coordinated
through the Commercial Components Hotline (1-888-
516-9347 option 4) staff and VFD Warranty and
Repair Program Coordinator (ECC-VFD Coordinator) .
All VFD warranty returns must have prior authorization
and must be returned to the specified Honeywell VFD
Service Center.
The warranty will not be honored if:
The warranty will not be honored if:
(i) product is damaged or missing parts or
accessory items including batteries.
(ii) product exhibits evidence of field
misapplications.
Final disposition of any warranty claim will be
determined solely by Honeywell. If inspection by
Honeywell does not disclose any defect covered by the
warranty, the product will be returned or scrapped as
instructed by the customer and Honeywell’s regular
service charges will apply. Products returned to the
customer may be sent shipping charges collect.
If you have any questions relative to product returns to
If you have any questions relative to product returns to
Honeywell, contact your Customer Care
Representative:
Honeywell International Inc.
Customer Care MN10-131A
1985 Douglas Drive
Golden Valley, MN 55422
1-888-793-8193
SPECIAL MESSAGE TO INDUSTRIAL USERS
AND BUILDING OWNERS
Thank you for using Honeywell products.
As a user, when you purchase a Honeywell product
As a user, when you purchase a Honeywell product
from this catalog you should expect performance from
the product and, if it fails, replacement of the product
by the installing dealer.
Typically, you will have purchased a Honeywell product
Typically, you will have purchased a Honeywell product
under the following circumstances:
1. To modernize or refurbish your existing
commercial and/or process control system.
2. You have purchased new commercial and/or
process heating, cooling, air cleaning or
humidification equipment that is furnished
with Honeywell controls or components (refer
to your owner’s manual furnished with the
equipment).
3. A control has failed on your existing
commercial and/or process heating and/or
cooling equipment and is replaced by a
Honeywell TRADELINE product.
With few exceptions, you utilize the services of a
competent plumbing, heating and/or cooling dealer/
contractor for new or replacement work performed.
Although our warranty does not extend to you,
Although our warranty does not extend to you,
Honeywell does extend a warranty to your supplier.
Your supplier can rely on its local Honeywell
Wholesaler/Distributor or Honeywell for prompt
replacement.
If you have any questions, need additional information
If you have any questions, need additional information
or would like to comment on Honeywell’s products or
services, please write or phone:
Honeywell International Inc.
Customer Care MN10-131A
1985 Douglas Drive North
Golden Valley, MN 55422-4386
1-888-793-8193
or check your telephone directory (white pages) for one
of many Honeywell field sales offices.