NAD C 516BEE Manual De Propietario

1 POWER: Press this button to switch ON the C 516BEE. The Standby 

LED indicator will turn from amber to blue and illuminate the Vacuum 
Fluorescent Display (VFD).  Pressing the power button again turns the 
unit back to standby mode.

The C 516BEE can also be switched ON from standby mode by pressing 
[OPEN/CLOSE] or [PLAY] button on the front panel as well as on the 
remote control. 

If the disc tray is open and the C 516BEE is powered OFF, the disc tray 
will draw close and the unit powered OFF.

2 INDICATOR:  This indicator will light up amber when the C 516BEE is 

in standby state. When the C 516BEE is at ON state, this indicator will 
illuminate blue.

3  DISC TRAY: With the DISC TRAY open, insert a CD or other compatible 

media disc face down onto the tray. 

“No Disc” appears on the C 516BEE’s VFD if the disc is placed upside 
down. 

4  REMOTE SENSOR: Point the CD 7 at the remote sensor and press the 

buttons. Do not expose the remote sensor of the CD 7 to a strong light 
source such as direct sunlight or illumination. If you do so, you may not 
be able to operate the C 516BEE with the remote control.  

Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.

5 VFD: The Vacuum Fluorescent Display (VFD) provides playback 

information, settings and other indicators.

6 PLAY: Press to start play or to resume play after Pause. If the disc tray 

is open, press this button to automatically close the tray and start 
playback if a disc is loaded. 

7 PAUSE: During playback, press this button to stop playback 

temporarily, keeping the optical pickup at its current position on the 
disc.  To resume playback at the exact point where it stopped, press 
[PLAY] or [PAUSE] again.

8 STOP: Press the [STOP] button once to stop playback and re-set the 

pickup to the beginning of the disc. The display reverts to showing the 
number of tracks and total playing time on the disc. If the   C 516BEE 
was programmed to play a selection of tracks, the program will be 
retained in the player’s memory. 

Pressing [STOP] twice at program mode will delete the program. 

9 OPEN/CLOSE: Press this button to open and close the disc tray. When 

in standby, this button will also power ON the C 516BEE and at the 
same time open the disc tray. 

10 SKIP/SCAN:  Press 

 to skip forward or 

 to skip backward a track 

or file.

Press and hold 

 or 

 for more than 2 seconds to search up or 

down a track. The SCAN 

 button causes the optical pickup to scan 

backwards through the recording at high speed. The SCAN 

 button 

causes the optical pickup to scan rapidly forward through the music.

©NAD C 516BEE