ClarIDy Solutions Inc. HNM001 Manual De Usuario
ClarIDy HF RFID Reader
14/19
© Copyright 2008 ClarIDy Solutions, Inc. All rights reserved.
3.2 Inventory and Stop Controls
Place the “RFID tag in the RF field (less than 4 cm on top of the reader) of the ClarIDy HF
RFID Reader. Click “Inventory” button to read the tag UID, see figure 13. The unique tag ID
(“UID”), number of reads (“Count”), and protocol will be shown on the table. Click “Stop” button to
stop it. You can clear the result by clicking the “Clear” button.
Figure 13. Inventory, Stop and Clear Controls
3.3 Block Data Control
“Block Data” is used to read/write ISO15693 Tag’s block data.
There are four options for ISO15693 Tag.
Normal: This is the default mode.
Option Flag Enabled: If this has checked, the Option Flag (Bit 7) of the ISO 15693
defined Request Flags will be set to 1. Some tags Write commands that Option
Flag must be set to 1. Ex: TI Tag.
Secure: When password has been written into the tag, please checked the
“Secure” and Input the Password to “PWD”.
Fujitsu_Fast Mode: For Fujitsu tag fast mode.