Bently Nevada Inc. 18531001 Manual De Usuario
Essential Insight.mesh
TM
Installation and Maintenance Manual
28
5.1.1 Mounting Considerations
There are two mounting options for a Manager
Gateway: Rack Mount and Remote Mount.
Gateway: Rack Mount and Remote Mount.
Rack Mount: The rack mount Manager Gateway
configuration allows you to install the Manager
Gateway (P/N 185510-01) in an industry standard 19-
inch instrument rack.
configuration allows you to install the Manager
Gateway (P/N 185510-01) in an industry standard 19-
inch instrument rack.
1. Attach the antenna included to the Manager
Gateway after mounting in the rack.
If 110/220 VAC power is available, you can use the
+24 Vdc industrial power supply to power the
Manager Gateway.
+24 Vdc industrial power supply to power the
Manager Gateway.
If the rack mount Manager Gateway is mounted in a
location where it cannot communicate with the
nearest wSIMs or Repeaters then the optional
antenna kit will be required (P/N 185519-01)
location where it cannot communicate with the
nearest wSIMs or Repeaters then the optional
antenna kit will be required (P/N 185519-01)
The 6dBi antenna and 23 m (75 Ft) cable included in
this kit must be used together.
this kit must be used together.
1. Attach the remote mount antenna to the
cable included.
2. Attach the RF cable provided with the kit to
the Manager Gateway.
3. Mount the antenna in the desired location
using the bracket provided with the kit.
NOTE
Any changes or modifications not expressly
approved by Bently Nevada LLC could void the
user’s authority to operate the equipment