G-Tek Electronics Corporation MIP Manual De Usuario

This option enables you to make advanced settings for 

the wireless mode. The following options are available:

• Power Saving: Select the On option to enable 

power saving when the MIP-100 is connected in 

Wi-Fi mode.

• RTS/CTS Threshold: specifies the threshold for 

RTS and CTS parameters. Key in a numeric value 

using the keypad.

• Frag. Threshold: specifies the fragment threshold. 

Key in a numeric value using the keypad.

• Transfer Rate: specifies the rate at which data 

transfer takes place. Select Auto to let the MIP-

100 to set the transfer rate automatically.

• Use DHCP: Select this option to set the DHCP pro-

tocol parameters. Select Yes if you want to use 

DHCP and a DHCP server in the network assigns IP 

addresses dynamically to the device. Select No if 

there is no DHCP server or if you want to assign 

the IP properties manually. The following parame-

ters have to be set:

– IP  Address

– Subnet Mask

– Default Gateway

– Primary DNS

– Alternate DNS

Choose this option to restore all settings to their default 

factory values.