Cardionet 1001 Manual De Usuario

Descargar
Página de 58
10
     Setting Up
2. Set  Up
Connecting At Home
Find an electrical outlet and phone jack in a
central location, preferably in your bedroom to
connect the CardioNet Base.  As long as you are
within range of the CardioNet Monitor, your
CardioNet Sensor can continue sending
heartbeats to the Monitor. If you go out of range,
the Sensor beeps to warn you.
When you go to any area in your house where
your Sensor is out of communications range
with your Monitor, simply take CardioNet
Monitor out of the Recharging Base and bring it
with you, so the Monitor can continue receiving
heartbeat signals from the Sensor.
Sometimes in larger houses, a second Base
Station is needed so that you can stay within
range without carrying your monitor around.
At night, keep the CardioNet Monitor in the
Recharging Base near your bed so CardioNet
can monitor your heartbeats, while you are
sleeping. The Monitor will also recharge its
battery while in the Base. It takes around four
hours to completely recharge the Monitor
battery, so you can carry it around with you the
following day.
Setting Up the Base
1
. Find an electrical outlet located close to a
phone jack, preferably in your bedroom
2
. Unplug the telephone line from the back of
your  telephone
3
. Take the telephone line that you just
unplugged and plug it into the slot on the
Base labeled “Phone In”.