Cardionet 1001 Manual De Usuario
40
Taking Care of the CardioNet Sensor
4. Sensor
Changing the Battery
The AA battery in the Sensor must be replaced with
a new, unused battery every 24 hours. We
recommend you turn your Monitor off before
changing your Sensor battery. This prevents the
Monitor from alarming because it cannot detect
your heartbeats when the Sensor has no power.
Turn Off the Monitor
1.
Press the
On / Wake
button located on the front
of the Monitor.
2.
Touch the
View Options
button on the touch
screen. The Options menu appears.
3.
Touch
Power Off
. A warning appears and asks if
you really want to power down.
4.
Touch
Yes
to confirm. A message briefly
appears to let you know that the Monitor is
powering down. Wait for the Monitor to
completely power down. The touch screen will
become blank.
Replace The Battery
1.
Press the top edge of the battery door to open it.
The door pops open.
2.
Take out the old battery and dispose of it in
accordance with local regulations and EPA
guidelines.
3.
Put in a new AA battery, included in your
CardioNet Service Kit. Insert the negative end
first.
4.
Close the cover.
If you are running low on batteries, contact the
CardioNet Monitoring Center and ask for additional
batteries. In an emergency, any available AA
battery can be used with the CardioNet Sensor.
+
-
Insert the battery,
negative (flat) end first,
bumpy side out.
negative (flat) end first,
bumpy side out.
Call the CardioNet
Service Center’s toll
free number if you are
running out of
replacement batteries.
Service Center’s toll
free number if you are
running out of
replacement batteries.
(866) 426-4401
Press firmly on the top
edge of the battery door
to open it. You can use
a table top or flat surface
to press against the
door. It pops open.
edge of the battery door
to open it. You can use
a table top or flat surface
to press against the
door. It pops open.