Cascade Networks Inc. 5200UNII Manual De Usuario

The Canopy subscriber module contains a series of web pages that are used to interface to the
unit.  The following is a quick reference to interface screens.  

  These screens are subject to

change by subsequent software versions.  To access the web based interface you first must be on
a computer that is in some way connected to the subscriber module.  This can be done either
directly or through a network.  Enter the IP address of the subscriber module (default is
169.254.1.1) into the address bar of your browser and hit enter on your keyboard.  The following
web based interface pages are accessible:

• 

Status

• 

Configuration

• 

Event Log

• 

AP Eval Data

• 

Ethernet Stats

• 

Expanded Stats

The default page, when accessing the IP address of the Canopy unit is, the Status page.

The Status page contains information on the operation of the product.  It is the default webpage.
The following parameters are displayed:

Device Type:  displays the type of Canopy module that is currently being viewed.  This field will let
the operator know the frequency band of the module, the protocol that it is utilizing, and the MAC
address of the module.  The frequency band can either be in the 5.2 GHz or 5.7 GHz band.  The
protocol for a subscriber module is 

multipoint

.  The MAC address will be in the following format, 0a-

00-3e-xx-xx-xx.

Software Version:  displays the version of the software that is currently loaded into the module.
Please make note of this information when obtaining technical support.

FPGA Version:  displays the version of the FPGA (field programmable gate array) that is currently
loaded into the module.  Please make note of this information when obtaining technical support.