FreeWave Technologies Inc. 1293514195135 Manual De Usuario

LRS400S Data Transceiver Users Manual 

LUM0025AA Rev A 

Version 1.0 

25 

Xmit Subnet ID.  This setting identifies the ID on which this device transmits, and in turn which 
devices will listen to it. The Xmit Subnet ID parameter is relevant for MultiPoint Repeaters only. 

The default (disable) setting for both Rcv and Xmit is F. 

Notes:  A Master will always transmit and receive on 0. Changing these settings on the Master is not 

recommended, under normal circumstances. 

In some MultiPoint Networks, the FreqKey will be at the same setting for all transceivers.  In other 
networks, where parallel Repeaters are introduced, the FreqKey value will need to change.  See 
FreqKey and Repeater Frequency sections earlier in this manual for more information. 

If both Rcv Subnet ID and Xmit Subnet ID are set to 0 the Subnet ID will show Roaming in the 
menu.  This setting will allow a mobile Slave to roam from subnet to subnet and possibly from 
network to network.  

 

This drawing depicts a Network in which Subnet IDs are used to force communications.  In this example, 
Repeater1 must talk directly to the Master; Repeater2 must talk directly to Repeater1.  Slaves 1, 2, and 3 
are forced along the direction of the solid lines.  Slave4 may link to the first Master or Repeater it hears.  

The respective Subnet ID diagram and settings are shown below.                                                      

 

     

Option (D) allows a transceiver to be designated with an arbitrary, user selectable, 4 digit number which 
identifies the transceiver in diagnostics mode. 

Local Access is not to be used at this time. 

Option (G) allows the user to set a unique 20 character Radio name.