Symbol Technologies MC7508 Manual De Usuario

Motorola reserves the right to make changes to any product to improve 
reliability, function, or design.
Motorola does not assume any product liability arising out of, or in connection 
with, the application or use of any product, circuit, or application described 
herein.
No license is granted, either expressly or by implication, estoppel, or otherwise 
under any patent right or patent, covering or relating to any combination, 
system, apparatus, machine,  material, method, or process in which Motorola 
products might be used. An implied license exists only for equipment, circuits, 
and subsystems contained in Motorola products.

For the complete Motorola hardware product warranty statement, go to: http://
www.symbol.com/warranty.

This product is covered by one or more patents. For patent information go to: 
http://www.symbol.com/patents.

If you have a problem using the equipment, contact your facility’s Technical or 
Systems Support. If there is a problem with the equipment, they will contact 
the Motorola Enterprise Mobility Support at: http://www.symbol.com/
contactsupport.
For the latest version of this guide go to: http://www.symbol.com/manuals.

Regulatory Guide

Windows  Mobile

®

  6 

This device is approved under the Symbol Technologies brand; Symbol 
Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. 
(“Motorola”).
All Symbol devices are designed to be compliant with rules and 
regulations in locations they are sold and will be labeled as required.
Any changes or modifications to Symbol equipment, not expressly 
approved by Symbol, could void the user's authority to operate the 
equipment.

Declared maximum operating temperature: 50°C.

This guide is available in local languages, translations can be 
downloaded from the following website:http://www.symbol.com/support/.

Underwriters Laboratories Inc. (UL) has not tested the performance or 
reliability of the Global Positioning System (GPS) hardware, operating 
software or other aspects of this product. UL has only tested for fire, 
shock or casualties as outlined in UL’s Standard(s) for Safety for 
Information Technology Equipment, UL60950-1. UL Certification does 
not cover the performance or reliability of the GPS hardware and GPS 
operating software. UL MAKES NO REPRESENTATIONS, 
WARRANTIES OR ERTIFICATIONS WHATSOEVER REGARDING 
THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED 
FUNCTIONS OF THIS PRODUCT.

This is an approved Bluetooth product. For more information or to view 
the End Product Listing, please visit http://www.bluetooth.org/tpg/
listings.cfm.

Regulatory markings, subject to certification, are applied to the device 
signifying the radio(s) are approved for use in the following countries: 
United States, Canada, Japan, S. Korea, Australia, and Europe

1

.

Please refer to the Motorola / Symbol Declaration of Conformity (DoC) 
for details of other country markings. This is available at http://
www2.symbol.com/doc/.
Note 1:

 Europe includes Austria, Belgium, Bulgaria, Czech Republic, 

Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, 
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, 
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, 
Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United 
Kingdom.

This device incorporates the International Roaming feature 
(IEEE802.11d) which will ensure the product operates on the correct 
channels for the particular country of use.

Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of 
this band is restricted to Indoor Use Only, any other use will make the 
operation of this device illegal.

The use in the UNII (Unlicensed National Information Infrastructure) 
band 1 5150-5250 MHz band is restricted to Indoor Use Only; any other 
use will make the operation of this device illegal.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 
1 to 11. The range of channels is limited by firmware.

•

Reduce or eliminate repetitive motion

•

Maintain a neutral postures

•

Reduce or eliminate excessive force

•

Keep objects that are used frequently within easy reach

•

Perform tasks at correct heights

•

Reduce or eliminate vibration

•

Reduce or eliminate direct pressure

•

Provide adjustable workstations

•

Provide adequate clearance

•

Provide a suitable working environment

•

Improve work procedures

Only use Motorola approved and UL Listed 
accessories, battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile 
computers or batteries. All components must be dry 
before connecting to an external power source.

In order to avoid or minimize the potential risk of 
ergonomic injury follow the recommendations below. 
Consult with your local Health & Safety Manager to 
ensure that you are adhering to your company’s safety 
programs to prevent employee injury.

•

Alternate hands whenever possible when performing a repetitive 
task.

RF signals may affect improperly installed or inadequately shielded 
electronic systems in motor vehicles (including safety systems). Check 
with the manufacturer or its representative regarding your vehicle. You 
should also consult the manufacturer of any equipment that has been 
added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including 
either installed or portable wireless equipment, in the area over the air 
bag or in the air bag deployment area. If in-vehicle wireless equipment is 
improperly installed and the air bag inflates, serious injury could result.
Position your device within easy reach. Be able to access your device 
without removing your eyes from the road.
Note:

 Connection to an alert device that will cause a vehicle horn to 

sound or lights to flash, on receipt of a call on public roads, is not 
permitted.

Do not take notes or use the device while driving. Jotting down a “to do” 
list or flipping through your address book takes attention away from your 
primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention 
to driving. Check the laws and regulations on the use of wireless devices 
in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good 
common sense and remember the following tips:

Get to know your wireless device and any features such as speed 
dial and redial. If available, these features help you to place your call 
without taking your attention off the road.

When available, use a hands free device.

Let the person you are speaking with know you are driving; if 
necessary, suspend the call in heavy traffic or hazardous weather 
conditions. Rain, sleet, snow, ice, and even heavy traffic can be 
hazardous.

Dial sensibly and assess the traffic; if possible, place calls when you 
are not moving or before pulling into traffic. Try to plan calls when 
your car will be stationary. If you need to make a call while moving, 
dial only a few numbers, check the road and your mirrors, then 
continue.

Do not engage in stressful or emotional conversations that may be 
distracting. Make people you are talking with aware you are driving 
and suspend conversations that have the potential to divert your 
attention from the road.

Use your wireless phone to call for help. Dial the Emergency 
services, (9-1-1 in the US, and 1-1-2 in Europe) or other local 
emergency number in the case of fire, traffic accident or medical 
emergencies. Remember, it is a free call on your wireless phone! 
The call can be made regardless of any security codes and 
depending on a network, with or without a SIM card inserted.

Use your wireless phone to help others in emergencies. If you see 
an auto accident, crime in progress or other serious emergency 
where lives are in danger, call the Emergency Services, (9-1-1 in the 
US, and 1-1-2 in Europe) or other local emergency number, as you 
would want others to do for you.

Call roadside assistance or a special non-emergency wireless 
assistance number when necessary. If you see a broken-down 
vehicle posing no serious hazard, a broken traffic signal, a minor 
traffic accident where no one appears injured, or a vehicle you know 
to be stolen, call roadside assistance or other special non-
emergency wireless number.

“The wireless industry reminds you to use your device / phone safely 
when driving.”

Please observe all warning notices with regard to the usage of wireless 
devices.

You are reminded of the need to observe restrictions on the use of radio 
devices in fuel depots, chemical plants etc. and areas where the air 
contains chemicals or particles (such as grain, dust, or metal powders) 
and any other area where you would normally be advised to turn off your 
vehicle engine.

Switch off your wireless device whenever you are instructed to do so by 
airport or airline staff. If your device offers a 'flight mode' or similar 
feature, consult airline staff as to its use in flight.

Wireless devices transmit radio frequency energy and may affect 
medical electrical equipment.
Wireless devices should be switched off wherever you are requested to 
do so in hospitals, clinics or healthcare facilities. These requests are 
designed to prevent possible interference with sensitive medical 
equipment.

Pacemaker manufacturers recommended that a minimum of 15 cm (6 
inches) be maintained between a handheld wireless device and a 
pacemaker to avoid potential interference with the pacemaker. These 
recommendations are consistent with independent research and 
recommendations by Wireless Technology Research.

•

Should ALWAYS keep the device more than 15cm (6 inches) from 
their pacemaker when turned ON.

•

Should not carry the device in a breast pocket.

•

Should use the ear furthest from the pacemaker to minimize the 
potential for interference.

•

If you have any reason to suspect that interference is taking place, 
turn OFF your device.

Please consult your physician or the manufacturer of the medical device, 
to determine if the operation of your wireless product may interfere with 
the medical device.

Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with Internationally recognized standards covering 
human exposure to electromagnetic fields from radio devices.

Handheld Devices
This device was tested for typical body-worn operation. Use only 
Motorola tested and approved belt-clips, holsters, and similar 
accessories to ensure EU Compliance.
For ‘International’ human exposure to electromagnetic fields, information 
please refer to the Motorola / Symbol Declaration of Conformity (DoC) at 
http://www2.symbol.com/doc/
US and Canada

Use only Motorola tested and approved belt-clips, holsters, and similar 
accessories to ensure FCC Compliance. The use of third-party belt-clips, 
holsters, and similar accessories may not comply with FCC RF exposure 
compliance requirements, and should be avoided. The FCC has granted 
an Equipment Authorization for these model phones with all reported 
SAR levels evaluated as in compliance with the FCC RF emission 
guidelines. SAR information on these model phones is on file with the 
FCC and can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid.

To comply with FCC RF exposure compliance requirement, the antenna 
used for this transmitter must not be co-located or operating in 
conjunction with any other transmitter/antenna except those already 
approved in this filing.

Complies with 21CFR1040.10 and 1040.11 except for deviations 

pursuant to Laser Notice No. 50, dated July 26, 2001.
EN60825-1:1994+ A1:2002 +A2:2001
IEC60825-1:1993+A1:1997+A2:2001
The laser classification is marked on one of the labels on the device.
Class 2 laser scanners use a low power, visible light diode. As with any 
very bright light source, such as the sun, the user should avoid staring 
directly into the light beam. Momentary exposure to a Class 2 laser is not 
known to be harmful.

LED LIGHT
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT

Use only a Motorola/Symbol approved power supply output rated 5.4 
VDC and minimum 3A. The power supply shall be Listed to UL/CSA 
60950-1; and certified to IEC60950-1 and EN60950-1 with SELV 
outputs. Use of alternative power supply will invalidate any approval 
given to this device and may be dangerous.

EPA (Environmental Protection Administration) 
requires dry battery producing or importing 
firms in accordance with Article 15 of the Waste 
Disposal Act are required to indicate the 
recycling marks on the batteries used in sales, 
giveaway or promotion. Contact a qualified Taiwanese recycler for 
proper battery disposal.

Symbol rechargeable battery packs are designed and constructed to the 
highest standards within the industry.
However, there are limitations to how long a battery can operate or be 
stored before needing replacement. Many factors affect the actual life 
cycle of a battery pack, such as heat, cold, harsh environmental 
conditions and severe drops.
When batteries are stored over six (6) months, some irreversible 
deterioration in overall battery quality may occur. Store batteries at half 
of full charge in a dry, cool place, removed from the equipment to 
prevent loss of capacity, rusting of metallic parts and electrolyte leakage. 
When storing batteries for one year or longer, the charge level should be 
verified at least once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is 30 days, regardless 
if the battery was purchased separately or included as part of the mobile 
computer. For more information on Symbol batteries, please visit: http:/
mysymbolcare.symbol.com/battery/batbasics1.html

•

The area in which the units are charged should be clear of debris 
and combustible materials or chemicals. Particular care should be 
taken where the device is charged in a non commercial environment.

•

Follow battery usage, storage, and charging guidelines found in the 
user's guide.

•

Improper battery use may result in a fire, explosion, or other hazard.

•

To charge the mobile device battery, the battery and charger 
temperatures must be between +32ºF and +104ºF (0ºC and +40ºC)

•

Do not use incompatible batteries and chargers. Use of an 
incompatible battery or charger may present a risk of fire, explosion, 
leakage, or other hazard. If you have any questions about the 
compatibility of a battery or a charger, contact Motorola Enterprise 
Mobility support.

•

To enable authentication of an approved battery, as required by 
IEEE1725 clause 10.2.1, all batteries will carry a Motorola hologram.  
Do not fit any battery without checking it has the Motorola 
authentication hologram.

•

Do not disassemble or open, crush, bend or deform, puncture, or 
shred.

•

Severe impact from dropping any battery-operated device on a hard 
surface could cause the battery to overheat.

•

Do not short circuit a battery or allow metallic or conductive objects 
to contact the battery terminals.

•

Do not modify or remanufacture, attempt to insert foreign objects into 
the battery, immerse or expose to water or other liquids, or expose to 
fire, explosion, or other hazard.

•

Do not leave or store the equipment in or near areas that might get 
very hot, such as in a parked vehicle or near a radiator or other heat 
source. Do not place battery into a microwave oven or dryer.

•

Battery usage by children should be supervised.

•

Please follow local regulations to promptly dispose of used re-
chargeable batteries.

•

Do not dispose of batteries in fire.

•

Seek medical advice immediately if a battery has been swallowed.

•

In the event of a battery leak, do not allow the liquid to come in 
contact with the skin or eyes. If contact has been made, wash the 
affected area with large amounts of water and seek medical advice.

•

If you suspect damage to your equipment or battery, contact 
Motorola Enterprise Mobility support to arrange for inspection.

When some wireless devices are used near some hearing devices 
(hearing aids and cochlear implants), users may detect a buzzing, 
humming, or whining noise. Some hearing devices are more immune 
than others to this interference noise, and wireless devices also vary in 
the amount of interference they generate. In the event of interference 
you may want to consult your hearing aid supplier to discuss solutions.

 The following paragraphs apply to the MC7508 / MC7598 only.

Risk of explosion if battery is replaced by an incorrect 
type.

Dispose of batteries according to instructions.

PRELIMINARY