Symbol Technologies TC700H Manual De Usuario

We reserves the right to make changes to any product to improve 
reliability, function, or design. We do not assume any product liability 
arising out of, or in connection with, the application or use of any product, 
circuit, or application described herein. No license is granted, either 
expressly or by implication, estoppel, or otherwise under any patent right 
or patent, covering or relating to  any  combination,  system,  apparatus, 
 machine,   material, method, or process in which our products might be 
used. An implied license exists only for equipment, circuits, and 
subsystems contained in the products.

For the complete hardware product warranty statement, go to: http://
www.motorolasolutions.com/warranty.

If you have a problem using the equipment, contact your facility’s 
Technical or Systems Support. If there is a problem with the equipment, 
they will contact the Global Support Center at: http://
www.motorolasolutions.com/support.

For the latest version of this guide go to: http://
www.motorolasolutions.com/support.

Symbol Technologies, Inc.
One Motorola Plaza
Holtsville, NY 11742-1300, U.S.A.
http://www.motorolasolutions.com
Symbol® is a registered trademark of Symbol Technologies, Inc. All 
other trademarks and service marks are proprietary to their respective 
owners.
© 2014 Symbol Technologies, Inc. All Rights Reserved.

MN000977A01 Rev. A — September 2014

This device is approved under Symbol Technologies, Inc. 
This guide applies to the Model Number: TC700H.
All Symbol devices are designed to be compliant with rules and 
regulations in locations they are sold and will be labeled as 
required.
Local language translations are available at the following website: 
http://www.motorolasolutions.com/support.
Any changes or modifications to Symbol equipment, not expressly 
approved by Symbol, could void the user's authority to operate the 
equipment.

Declared maximum operating temperature: 50°C.

This is an approved Bluetooth product. For more information or to 
view the End Product Listing, please visit http://www.bluetooth.org/
tpg/listings.cfm.

Regulatory markings, subject to certification, are applied to the 
device signifying the radio(s) are approved for use in the following 
countries: United States, Canada, Japan, China, S. Korea, 
Australia, and Europe. Please refer to the Declaration of Conformity 
(DoC) for details of other country markings. This is available at
http://www.motorolasolutions.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Croatia, Czech 
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, 
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, 
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, 
Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, 
Switzerland and the United Kingdom.

This device incorporates the International Roaming feature 
(IEEE802.11d) which will ensure the product operates on the 
correct channels for the particular country of use.

Caution: The device for the band 5150 - 5250 MHz is only for 
indoor usage to reduce potential for harmful interference to co-
Channel mobile satellite systems. High power radars are allocated 
as primary users (meaning they have priority) of 5250 - 5350 MHz 
and 5650 - 5850 MHz and these radars could cause interference 
and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150 - 
5250 MHz est réservé uniquement pour une utilisation à l'intérieur 
afin de réduire les risques de brouillage préjudiciable aux systèmes 
de satellites mobiles utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés 
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bands 
5250 - 5350 MHz et 5650 - 5850 MHz et que ces radars pourraient 
causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

The available channels for 802.11 b/g operation in the US are 
Channels 1 to 11. The range of channels is limited by firmware.

• Reduce or eliminate repetitive motion
• Maintain a neutral postures
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures

RF signals may affect improperly installed or inadequately shielded 
electronic systems in motor vehicles (including safety systems). 
Check with the manufacturer or its representative regarding your 
vehicle. You should also consult the manufacturer of any equipment 
that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, 
including either installed or portable wireless equipment, in the area 
over the air bag or in the air bag deployment area. If in-vehicle 
wireless equipment is improperly installed and the air bag inflates, 
serious injury could result. 
Position your device within easy reach. Be able to access your 
device without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to 
sound or lights to flash, on receipt of a call on public roads, is not 
permitted.
IMPORTANT 
Before installing or using, check state and local laws regarding 
windshield mounting and use of equipment.
For Safe installation
• Do not put your phone in a location that obstructs the drivers 

vision or interferes with the operation of the Vehicle.

• Do not cover an airbag.

Do not take notes or use the device while driving. Jotting down a “to 
do” list or flipping through your address book takes attention away 
from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full 
attention to driving. Check the laws and regulations on the use of 
wireless devices  in the areas where you drive. Always obey them. 
When using a wireless device behind the wheel of a car, practice 
good common sense and remember the following tips:
1. Get to know your wireless device and any features such as 

speed dial and redial. If available, these features help you to 
place your call without taking your attention off the road.

2. When available, use a hands free device. 
3. Let the person you are speaking with know you are driving; if 

necessary, suspend the call in heavy traffic or hazardous 
weather conditions. Rain, sleet, snow, ice, and even heavy 
traffic can be hazardous.

4. Dial sensibly and assess the traffic; if possible, place calls when 

you are not moving or before pulling into traffic. Try to plan calls 
when your car will be stationary. If you need to make a call while 
moving, dial only a few numbers, check the road and your 
mirrors, then continue. 

5. Do not engage in stressful or emotional conversations that may 

be distracting. Make people you are talking with aware you are 
driving and suspend conversations that have the potential to 
divert your attention from the road.

6. Use your wireless phone to call for help. Dial the Emergency 

services, (9-1-1 in the US, and 1-1-2 in Europe) or other local 
emergency number in the case of fire, traffic accident or medical 
emergencies. Remember, it is a free call on your wireless 

phone! The call can be made regardless of any security codes 
and depending on a network, with or without a SIM card 
inserted.

7. Use your wireless phone to help others in emergencies. If you 

see an auto accident, crime in progress or other serious 
emergency where lives are in danger, call the Emergency 
Services, (9-1-1 in the US, and 1-1-2 in Europe) or other local 
emergency number, as you would want others to do for you.

8. Call roadside assistance or a special non-emergency wireless 

assistance number when necessary. If you see a broken-down 
vehicle posing no serious hazard, a broken traffic signal, a minor 
traffic accident where no one appears injured, or a vehicle you 
know to be stolen, call roadside assistance or other special non-
emergency wireless number.

“The wireless industry reminds you to use your device / phone 
safely when driving.”

Please observe all warning notices with regard to the usage of 
wireless devices.

You are reminded of the need to observe restrictions on the use of 
radio devices in fuel depots, chemical plants etc. and areas where 
the air contains chemicals or particles (such as grain, dust, or metal 
powders) and any other area where you would normally be advised 
to turn off your vehicle engine. 

Switch off your wireless device whenever you are instructed to do 
so by airport or airline staff. If your device offers a 'flight mode' or 
similar feature, consult airline staff as to its use in flight.

Wireless devices transmit radio frequency energy and may affect 
medical electrical equipment.
Wireless devices should be switched off wherever you are 
requested to do so in hospitals, clinics or healthcare facilities. 
These requests are designed to prevent possible interference with 
sensitive medical equipment.

Pacemaker manufacturers recommended that a minimum of 15 cm 
(6 inches) be maintained between a handheld wireless device and a 
pacemaker to avoid potential interference with the pacemaker. 
These recommendations are consistent with independent research 
and recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) 

from their pacemaker when turned ON.

• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the 

potential for interference.

• If you have any reason to suspect that interference is taking 

place, turn OFF your device.

Please consult your physician or the manufacturer of the medical 
device, to determine if the operation of your wireless product may 
interfere with the medical device.

Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions 
supplied.
International
The device complies with internationally recognized standards 
covering human exposure to electromagnetic fields from radio 
devices. For information on "International" human exposure to 
electromagnet fields refer to the Symbol Declaration of Conformity 
(DoC) at http://www.motorolasolutions.com/doc. For further 

information on the safety of RF energy from wireless devices - see 
http://responsibility.motorolasolutions.com/index.php/downloads. 
Located under Wireless Communications and Health.

Handheld Devices
This device was tested for typical body-worn operation.  Use only 
Symbol tested and approved belt-clips, holsters, and similar 
accessories to ensure EU Compliance.

Use only Symbol tested and approved belt-clips, holsters, and 
similar accessories to ensure FCC Compliance. The use of third-
party belt-clips, holsters, and similar accessories may not comply 
with FCC RF exposure compliance requirements, and should be 
avoided. The FCC has granted an Equipment Authorization for 
these model phones with all reported SAR levels evaluated as in 
compliance with the FCC RF emission guidelines. SAR information 
on these model phones is on file with the FCC and can be found 
under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the 
antenna used for this transmitter must not be co-located or 
operating in conjunction with any other transmitter/antenna except 
those already approved in this filing.
To satisfy US and Canadian RF exposure requirements, a 
transmitting device must operate with a minimum separation 
distance of 1.5 cm or more from a person's body.
Pour satisfaire aux exigences Américaines et Canadiennes 
d'exposition aux radiofréquences, un dispositif de transmission doit 
fonctionner avec une distance de séparation minimale de 1.5 cm ou 
plus de corps d'une personne.

Class 2 laser scanners use a low power, visible light diode. As with 
any very bright light source, such as the sun, the user should avoid 
staring directly into the light beam. Momentary exposure to a Class 
2 laser is not known to be harmful.
The following statement is required to comply with US and 
international regulations.
CAUTION: Use of controls, adjustments or performance of 
procedures other than those specified herein may result in 
hazardous laser light exposure.

Labels read:
1. LASER/LED LIGHT - DO NOT STARE INTO BEAM OR VIEW 
DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS 2 LASER/1M 
LED PRODUCT.
2. CAUTION - CLASS 2 LASER, 1M LED LIGHT WHEN OPEN. DO 
NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL 
INSTRUMENTS.
3. COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR 
DEVIATIONS PURSUANT TO LASER NOTICE NO. 50, DATED 
JUNE 24, 2007, AND IEC 60825-1:2007 (Ed.1.2, 2.0), EN60825-
1:2007 & IEC 62471:2006 (Ed.1.0); EN 62471:2008.

For LED devices which have been evaluated to IEC 62471 and 
comply with the Exempt Risk Group, no product labeling 
requirements apply. However, the following statement is required to 
comply with US and international regulations:
LED Compliance Statement:
Classified as “EXEMPT RISK GROUP” according to IEC 
62471:2006 and EN 62471:2008
Pulse duration: 1.7 ms 

Use ONLY a Symbol approved UL LISTED ITE (IEC/EN 60950-1, 
LPS) power supply with electrical ratings: Output 5.4 VDC, min 
3.0 A, with a maximum ambient temperature of at least 50 °C. Use 
of alternative power supply will invalidate any approvals given to 
this unit and may be dangerous.

EPA (Environmental Protection 
Administration) requires dry battery producing 
or importing firms in accordance with Article 
15 of the Waste Disposal Act are required to 

indicate the recycling marks on the batteries used in sales, 
giveaway or promotion. Contact a qualified Taiwanese recycler for 
proper battery disposal.

Use only Symbol approved batteries. Accessories which have 
battery charging capability are approved for use with the following 
battery models:
• Symbol 82-171249-01 (3.7 VDC, 4500 mAh)
Symbol rechargeable battery packs are designed and constructed 
to the highest standards within the industry.
However, there are limitations to how long a battery can operate or 
be stored before needing replacement. Many factors affect the 
actual life cycle of a battery pack, such as heat, cold, harsh 
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible 
deterioration in overall battery quality may occur. Store batteries at 
half of full charge in a dry, cool place, removed from the equipment 
to prevent loss of capacity, rusting of metallic parts and electrolyte 
leakage. When storing batteries for one year or longer, the charge 
level should be verified at least once a year and charged to half of 
full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is one year, 
regardless if the battery was purchased separately or included as 
part of the mobile computer. For more information on Symbol 
batteries, please visit: https://
atgsupportcentral.motorolasolutions.com/content/emb/docs/MSC/
batbasics1.pdf

• The area in which the units are charged should be clear of 

debris and combustible materials or chemicals. Particular care 
should be taken where the device is charged in a non 
commercial environment.

• Follow battery usage, storage, and charging guidelines found in 

the User Guide.

• Improper battery use may result in a fire, explosion, or other 

hazard.

• To charge the mobile device battery, the battery and charger 

temperatures must be between +32 ºF and +104 ºF (0 ºC and 
+40 ºC).

• Do not use incompatible batteries and chargers. Use of an 

incompatible battery or charger may present a risk of fire, 
explosion, leakage, or other hazard. If you have any questions 
about the compatibility of a battery or a charger, contact Symbol 
Support.

• For devices that utilize a USB port as a charging source, the 

device shall only be connected to products that bear the USB-IF 
logo or have completed the USB-IF compliance program.

• Do not disassemble or open, crush, bend or deform, puncture, 

or shred.

• Severe impact from dropping any battery-operated device on a 

hard surface could cause the battery to overheat.

• Do not short circuit a battery or allow metallic or conductive 

objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects 

into the battery, immerse or expose to water or other liquids, or 
expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might 

get very hot, such as in a parked vehicle or near a radiator or 
other heat source. Do not place battery into a microwave oven 
or dryer.

• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-

chargeable batteries.

• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been 

swallowed.

• In the event of a battery leak, do not allow the liquid to come in 

contact with the skin or eyes. If contact has been made, wash 
the affected area with large amounts of water and seek medical 
advice.

• If you suspect damage to your equipment or battery, contact 

Global Customer Support to arrange for inspection.

This device is marked HAC showing compliance with the applicable 
requirements of IC CS-03-Part 5.

Note: This equipment has been tested and found 
to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC rules. 
These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However there is no guarantee that interference 
will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for 

help.

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.
The use of 5 GHz WLAN's, for use in the US, have the following 
restrictions:
• Notched Band 5.60 - 5.65 GHz.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme 
NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B) 

For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following 
restrictions:

Only use Symbol approved and UL Listed 
accessories, battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile 
computers or batteries. All components must be 
dry before connecting to an external power 
source.

Operation of the device without regulatory approval is 
illegal.

In order to avoid or minimize the potential risk of 
ergonomic injury follow the recommendations 
below. Consult with your local Health & Safety 
Manager to ensure that you are adhering to your 
company’s safety programs to prevent employee 
injury.

3

2

1

Risk of explosion if battery is replaced by an 
incorrect type. Dispose of batteries according to 
instructions.

PRELIMINARY