Binsfeld Engineering Inc TX10K-LP Manual De Usuario
- 10 -
Signal Processing
The TX10K data signal is processed by the RX10K as follows:
1. Receive signal from TX10K
2. Check for errors and display if any detected
3. Check for simulated signal and apply if enabled
4. Apply Filter
5. Apply AutoZero
6. Apply Polarity
7. Apply Gain
8. Apply Output Offset
9. Send signal to display, voltage output, and digital output
The TX10K data signal is processed by the RX10K as follows:
1. Receive signal from TX10K
2. Check for errors and display if any detected
3. Check for simulated signal and apply if enabled
4. Apply Filter
5. Apply AutoZero
6. Apply Polarity
7. Apply Gain
8. Apply Output Offset
9. Send signal to display, voltage output, and digital output
TX10K-LP-S Transmitter
The TX10K-LP-S Transmitter is encased in a small, rugged, potted
plastic housing. The TX10K-LP-S also features a Status Indicator
light, an Infrared Receiver lens, and a screw terminal block for
making power and sensor input connections.
plastic housing. The TX10K-LP-S also features a Status Indicator
light, an Infrared Receiver lens, and a screw terminal block for
making power and sensor input connections.
Figure 3: TX10K-LP-S Transmitter
Infrared Receiver
Status Indicator Light
Screw
Terminal
Block
Terminal
Block
Internal Antenna