Binsfeld Engineering Inc TX10K-LP Manual De Usuario
- 4 -
Features and Controls
RX10K Receiver
The RX10K Receiver features a simple keypad on the front panel
for user configuration and adjustment. A two-line display indicates
the operational status of the RX10K. The RX10K outputs the
signal received from the TX10K Transmitter in three ways: 1) as
text and graphics on the display, 2) as an analog voltage signal,
and 3) as a digital data signal.
The top line of the RX10K display indicates the average level of
the transmitted signal in numerical form on the left and in graphical
form on the right (Figure 1). The numeric value corresponds to the
Voltage Output signal in millivolts. For example, an output signal
of +8.450V would be displayed as “+08450”. The bar graph
provides a visual representation of the output signal level. Each
position on the bar graph represents approximately 2V. Both the
numerical and graphical indicators are averages of the received
signal level over a time period of about 0.2 seconds.
for user configuration and adjustment. A two-line display indicates
the operational status of the RX10K. The RX10K outputs the
signal received from the TX10K Transmitter in three ways: 1) as
text and graphics on the display, 2) as an analog voltage signal,
and 3) as a digital data signal.
The top line of the RX10K display indicates the average level of
the transmitted signal in numerical form on the left and in graphical
form on the right (Figure 1). The numeric value corresponds to the
Voltage Output signal in millivolts. For example, an output signal
of +8.450V would be displayed as “+08450”. The bar graph
provides a visual representation of the output signal level. Each
position on the bar graph represents approximately 2V. Both the
numerical and graphical indicators are averages of the received
signal level over a time period of about 0.2 seconds.
Figure 1: Front view of the RX10K
When an operational error is detected, the top line of the display
alternates between the corresponding error code and the actual
signal. See Appendix C for a complete list of error codes.
+08450 -_
_
_
_
_
0
_
_
_
█
_+
Rx
C
h: 1
=
=
=
=
=
=
=
=
=
=