Creative Labs 3RFMPSS Manual De Usuario

 

 
 
4.1 Concept of Connect Mechanism 
 
Press this button on the CU and MU to enable the Connect mechanism for protected mode in 
which only the CU and MU(s) using the same Connect code can communicate.  
 
This differentiates the MU(s) that are connected to different CU(s) which are using different 
Connect codes. 
 
Only 1 CU can be connected to the MU(s) in the same protected mode. 
 
By default, the evaluation boards uses the open unprotected mode in which the CU and MU(s) 
not using any Connect code can communicate. 
 
The CU and MU will remember the connect code and the mode of operation (open or protected). 
 
 
4.2 To establish protected mode: 
 
 
Step 1:  Press this button only on the CU and MU(s) that must be connected. 
 
 
Step 2: Press this button on the MU(s) that must be connected.  

 
The RF LEDs will start to flash to indicate that the MU is ready to receive new Connect 
code from the CU. 
 
 

Step 3: Press this button on the CU.  

 
The CU will send a random 16-bit Connect code to the MU(s) that must be connected.  
 
The protected mode should be established within 30 seconds after the button is pressed. 
After 30 seconds, this will cease. 
 
After the protected mode has been established, only the MU(s) using the same Connect 
code with the CU can receive the audio streams from the CU.  

 
 
4.3 To resume open mode or unestablish protected mode: 
 
Press Volume Up + Volume Down + Reset (or Off/On Power) together at the same time. 
 
If this is performed on the MU, only the MU is resumed to open mode. 
 
If this is performed on the CU, only the CU is resumed to open mode. This does not resume the 
MU(s) to open mode. 
 
 
 
 
 

 

16