Creative Labs AVPCW0380 Manual De Usuario

8   

Radio Mode recieves analog radio from the AM or FM 
band and displays Radio Data System (RDS) 
information about the station and show being 
broadcast.

Before entering Radio mode, connect both the AM and 
FM aerials to  their respective Antenna connector at the 
rear of the radio and fully extend the aerial.

From the main menu, tap:

You’ll see the following screen, with your last selected 
AM or FM frequency displayed.

You can use the frequency scale across the center of 
the screen to search for radio stations. Simply tap any 
part of this scale  to tune the radio to the corresponding 
radio frequency.

The following actions are available on this screen.

For stations with good signal strength which broadcast 
RDS (Radio Data System) information, the screen will 
display the RDS data.

You can store up to 10 favorite station presets in Radio 
Mode.

Select the AM radio frequency band.

Select the FM radio frequency band.

Tune the radio frequency up one step at a 
time.

Tune the radio frequency down one step at 
a time.

Scan up the radio frequency till the next 
available station is found.

Scan down the radio frequency till the 
next available station is found.

Add the station you’re listening to as a 
new favorite. Select a slot in your 
Favorites list to save to. If there is an 
existing favorite in the slot you selected, it 
will be replaced automatically.

Review your Favorites list. Select the 
favorite station you want by tapping the 
corresponding slot.

CSW Ambiance Touch Radio_EN.fm  Page 8  Friday, July 8, 2011  5:18 PM