Garmin International Inc 0037600 Manual De Usuario
Preliminary
GTX 327 Installation Manual
Page 13
190-00187-02
Rev 1
3.2.3 Configuration Pages
Holding down the CRSR button and pressing the ON button provides access to the configuration pages. The
FUNC button will sequence through the configuration pages. The CRSR button will highlight selectable
fields on each page. When a field is highlighted, numeric data entry will be performed with the 0-9 buttons,
and list selections will be performed with the 8 or 9 buttons. Changes made through the configuration pages
are stored in EEPROM memory.
FUNC button will sequence through the configuration pages. The CRSR button will highlight selectable
fields on each page. When a field is highlighted, numeric data entry will be performed with the 0-9 buttons,
and list selections will be performed with the 8 or 9 buttons. Changes made through the configuration pages
are stored in EEPROM memory.
•
Display Backlight Page
Current display backlight intensity: displayed value
Select manual or automatic backlight source
Automatic backlight source: Select automatic backlight source (Photocell, 28Vdc, 5Vdc)
Display backlight filter response time: Select display backlight response time (3-7) (default to 4)
Display backlight filter slope: Select display backlight filter slope value (0-99) (default to 50)
Display backlight filter minimum value: Select display minimum filter slope value (0-99) (default to 50)
Display backlight filter offset: Select display backlight filter offset value (0-99) (default to 50)
Current display backlight intensity: displayed value
Select manual or automatic backlight source
Automatic backlight source: Select automatic backlight source (Photocell, 28Vdc, 5Vdc)
Display backlight filter response time: Select display backlight response time (3-7) (default to 4)
Display backlight filter slope: Select display backlight filter slope value (0-99) (default to 50)
Display backlight filter minimum value: Select display minimum filter slope value (0-99) (default to 50)
Display backlight filter offset: Select display backlight filter offset value (0-99) (default to 50)
•
Key Backlight Page
Current key backlight intensity: Displayed value
Automatic key backlight source: Select automatic key backlight source (Photocell, 28Vdc, 5Vdc)
Key backlight filter response time: Select key backlight response time (3-7) (default to 4)
Key backlight filter slope: Select key backlight filter slope value (0-99) (default to 50)
Key backlight filter minimum value: Select key minimum filter slope value (0-99) (default to 50)
Key backlight filter offset: Select key backlight filter offset value (0-99) (default to 50)
Current key backlight intensity: Displayed value
Automatic key backlight source: Select automatic key backlight source (Photocell, 28Vdc, 5Vdc)
Key backlight filter response time: Select key backlight response time (3-7) (default to 4)
Key backlight filter slope: Select key backlight filter slope value (0-99) (default to 50)
Key backlight filter minimum value: Select key minimum filter slope value (0-99) (default to 50)
Key backlight filter offset: Select key backlight filter offset value (0-99) (default to 50)
•
Contrast Configuration Page
Select contrast mode (Auto, Manual) (default, to Auto)
Select contrast offset (0 to99) (default, to 50)
Select contrast mode (Auto, Manual) (default, to Auto)
Select contrast offset (0 to99) (default, to 50)
•
Operation Configuration Page #1
VFR identification code: Enter the VFR identification code (default 1200)
Altitude Input source: Select the altitude input source [Gray code(default), Icarus, Shadin]
Altitude display format: Select altitude display format [Flight level (default), Feet, Meters]
Aircraft climb rate: Enter aircraft climb rate [100 to 2000 fpm (500 fpm default)]
VFR identification code: Enter the VFR identification code (default 1200)
Altitude Input source: Select the altitude input source [Gray code(default), Icarus, Shadin]
Altitude display format: Select altitude display format [Flight level (default), Feet, Meters]
Aircraft climb rate: Enter aircraft climb rate [100 to 2000 fpm (500 fpm default)]
•
Operation Configuration Page #2
SQUAT SWITCH sense
Automatic STBY operation enabled
Automatic STBY delay duration
SQUAT SWITCH sense
Automatic STBY operation enabled
Automatic STBY delay duration
•
Gray Code Input Configuration Page
Gray Code discretes
Gray Code altitude
Gray Code discretes
Gray Code altitude
•
Discrete Input Configuration Page
EXTERNAL IDENT input:
EXTERNAL STANDBY input:
SQUAT SWITCH input: On ground equals High or Low
EXTERNAL IDENT input:
EXTERNAL STANDBY input:
SQUAT SWITCH input: On ground equals High or Low