CALAMP WIRELESS NETWORKS INC. 1409123000 Manual De Usuario
CONFIGURATION
001-9193-001 Version 2
Page 25 of 52
Sentry 4G
TM
User
Manual
To add a channel in the channel table:
Enter the desired number in No.
Enter the frequency
Using the drop-down menu select the Bandwidth
Click “Add”.
5.3.3
Status
The Status tab of the WWAN page displays the current WWAN interface status including firmware
version, link status, and link information. Information on this page is read-only.
version, link status, and link information. Information on this page is read-only.
Figure 10 – Sentry 4G Router WWAN Status
Once EAP-TTLS authentication is enabled, the IP configuration for the WWAN interface will be
obtained through the BTS. Note: The IP address for the WWAN interface is displayed under
the Unit Status
If no authentication is selected, the IP address for the WWAN interface must be entered
manually (see WWANSettings)
Link Status
The RSSI information displays the average value and the instantaneous value. The average
is to be considered.
The CINR information displays reuse1, reuse3 and preamble values.
The RSSI information displays the average value and the instantaneous value. The average
is to be considered.
The CINR information displays reuse1, reuse3 and preamble values.