B+B SmartWorx APPN551 Manual De Usuario
B&B Electronics, Inc.
APPN-TT551 Databook
14
5.1
AC Electrical Characteristics – Transmitter
Transmit power is automatically managed by the device for minimum power
consumption. The MAXIMUM transmit power at the RF connector is typically
+15dBm
consumption. The MAXIMUM transmit power at the RF connector is typically
+15dBm
±
2 dB for all bands (b/g/n) and rates.
5.2
Performance/Range
The following table illustrates the typical data rates, performance and range that
the device is capable of providing using an omni directional antenna.
the device is capable of providing using an omni directional antenna.
Table 9 - Radio Typical Performance Range
Data Rate
Typical Outdoor Distance
(2dBi antenna gain on each end for
B/G mode)
1.0 Mb/s
350m
11.0 Mb/s
270m
6Mb/s 802.11g
260m
54Mb/s 802.11g
104m
Ranges are based on receiver sensitivity, Transmitter power, free-space path
loss estimates, antenna gain factors, and link margin estimates. Actual range will
vary from those stated. Non line-of-sight applications will result in typical values
less than shown above.
loss estimates, antenna gain factors, and link margin estimates. Actual range will
vary from those stated. Non line-of-sight applications will result in typical values
less than shown above.
The Data Rate is the supported connection rate for the wireless link. However,
the actual data throughput for the link will be less than the stated data rates.
the actual data throughput for the link will be less than the stated data rates.