B+B SmartWorx THINQ1 Manual De Usuario
Quatech SDS User’s Manual
Configuring the SDS using a Web interface
Figure 60 - Ping results screen
Step
Procedure
Description
Step 2
Press the Ping Test link to return to the
Ping Test screen.
Ping Test screen.
You can also press the Backspace key to
return to the Ping Test screen.
return to the Ping Test screen.
Checking wireless status
Step
Procedure
Description
Preliminary
Step
Step
Click on Diagnostics from the selection
bar and then click on Wireless Status
bar and then click on Wireless Status
from the left panel.
The Wireless Status screen displays.
Figure 61 – Wireless Status screen
Step
Procedure
Description
Step 1
The wireless status displays the current
channel, the bit rate, and a set of metrics
channel, the bit rate, and a set of metrics
that give an indication of the quality of
the wireless connection
Performing administrative functions
The Admin functions let you update the software, assign a descriptive
name to the SDS, and manage users (control who can access the SDS
from the Web interface). You can access these functions by selecting
from the Web interface). You can access these functions by selecting
Admin from the selection bar.
Managing users
Initially, the SDS is configured to have no exclusive users. This
means that anyone with the device drivers installed and who knows
the SDS’ IP address can use the Web interface to configure and
the SDS’ IP address can use the Web interface to configure and
manage the SDS.
Note: You can create a
maximum of ten users for each
SDS.
maximum of ten users for each
SDS.
You can create users to restrict this type of access to approved
personnel only. Once you create a user, only someone using that user
personnel only. Once you create a user, only someone using that user
ID and password has Web access to the SDS.
March 2005
940-0183-151
Page 71