B+B SmartWorx WLNG1 Manual De Usuario
Operate the All-in-One
25
If you perform a partial or incomplete print, the All-in-One will time out, emit a Hi-Lo tone, and
the red tail lights will flash once.
the red tail lights will flash once.
Clear print data
If you find that you have an incomplete print or do not wish to print, two options are available:
Press the yellow CLEAR button on the control panel, then scan and print again. The All-in-One
will emit a single mid-tone note and the green tail lights will turn off after the CLEAR button is
pressed.
will emit a single mid-tone note and the green tail lights will turn off after the CLEAR button is
pressed.
Wait for the All-in-One to time out and erase the scan from the memory. The All-in-One will
emit a Hi-Lo tone and the red tail lights will flash once, letting you know you can scan and print
again.
emit a Hi-Lo tone and the red tail lights will flash once, letting you know you can scan and print
again.