Becker Avionics GmbH AR6203 Manual De Usuario
Operating Instructions
Frequency Selection Modes
16
VHF Transceiver Family 620X
0638.420-071 Issue 03 July 2015
2.5.2.
Direct Tune Mode
Press the "MDE" key until the direct tune mode page appears.
IC
SQL
SQL
118.005
BAT 13.5V
Note:
The battery information is only displayed if BATTERY
VOLTAGE in the installation setup is selected.
In direct tune mode, the active frequency appears in the top line. It can be
edited by means of the "ROTARY ENCODER" following the procedure.
Changing the active frequency when in direct tune mode;
•
Make a "short press" on the "ROTARY ENCODER" for
modification of the 100 MHz digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise
to change the frequency in 1 MHz steps.
IC
SQL
SQL
118
.005
•
Make another "short press" on the "ROTARY ENCODER" for
modification of the 100 kHz digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise
to change the frequency in 100 kHz steps.
IC
SQL
SQL
118.
0
05
•
Make another "short press" on the "ROTARY ENCODER" for
modification of the 25/8.33 kHz digits.
Rotate the "ROTARY ENCODER" clockwise/counter clockwise
to change the frequency in 25/8.33 kHz steps.
IC
SQL
SQL
118.0
05