GTSYS Limited IRUPOE-07-V2 Manual De Usuario
Quick Reference Guide
3.3 Approval Frequency Hopping
Test the frequency hopping behavour of the RFID reader. In this mode the reader change the
frequency and hopping over the channels defined per selected region.
FCC: 50 channels, ETSI: 4 channels, India: 3 channels
frequency and hopping over the channels defined per selected region.
FCC: 50 channels, ETSI: 4 channels, India: 3 channels
To proceed with the frequency hopping test:
•
Select the tab 'Hopping Test'
•
Set the power if needed (see page 10 - 6.1To set the power level)
•
Click the 'Start' button to make the RFID reader run the test mode.
The carrier indication Icon change from 'Carrier off' to 'Carrier on'
The carrier indication Icon change from 'Carrier off' to 'Carrier on'
•
Click the 'Stop' to stop the test.
The carrier indication Icon change from 'Carrier on' to 'Carrier off'
The carrier indication Icon change from 'Carrier on' to 'Carrier off'
GTSYS LTD. R07 9/F Kwai Shing Ind. Bld Phase 2, 42-46 Tai Lin Pai Road, Kwai Chung, HONG KONG SAR – Email: sales@gtsys.com.hk
Copyright © 2015 GTSYS – GTSYS reserves the right to change specifications without prior notice
Page 5 / 11