Beijing BOE Display Technology Co. LTD GVC3200LED Manual De Usuario

Can’t select a certain channel.

• The channel may be blocked or not approved in the PARENTAL Menu.

The stereo sound performance is bad.

• It may be a weak station. Use the SOUND Menu and set Analog Sound as Mono.

A black box appears on the screen.

• Closed captioning might be on. Check Closed Caption in the SETUP menu. Go to page 30 for more instructions.

• The channel may be skipped in channel list in CHANNEL Menu. Check the blocking and skipping status of channel.

Problems with the HDMI Connection.

• Make sure the HDMI device (DVD, video gamer, etc.) is turned on and the cables are firmly connected. If problems still occur,

turn off your device and reconnect it. Reset the power by unplugging the power cord and plugging it again.
• If a “No Signal” message appears on screen , the HDMI device isn’t responding. Contact the manufacturer of the HDMI device

for further assistance.
• If you have black bars on each side of your picture (which means the TV can not display a full-screen image), the device you

connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose

either 720p or 1080i.

The Remote control doesn’t work.

• Something might be blocking between the remote control and the remote sensor on the front panel of the TV. Make sure

there is a clear path.

You are experiencing problems with V-Chip/Parental Controls.

• If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select

PARENTAL to check the settings.

• The remote may not be aimed directly at the TV.
• The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.

Troubleshooting