General Research of Electronics Inc 0602902 Manual De Usuario
Code
Meaning
Corrective Action
03-00
No MicroSD Card
inserted
inserted
Ensure that a properly formatted MicroSD card is
fully inserted and locked in the MicroSD slot.
fully inserted and locked in the MicroSD slot.
03-01
General error
initializing file
system
initializing file
system
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
03-02
Cluster size bad
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
03-03
Error reading
MicroSD card
MicroSD card
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
03-04
Error writing
MicroSD card
MicroSD card
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
03-05
MicroSD Card is
full
full
Reduce size of configuration, remove
unnecessary audio recordings or switch to a
MicroSD card with more capacity.
unnecessary audio recordings or switch to a
MicroSD card with more capacity.
03-06
MicroSD Card is
write protected
write protected
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
03-07
Mass storage
mode is active
mode is active
Under normal conditions this error should not
appear. Mass storage device mode is disabled
when the scanner is connected to a computer and
scanning. Disconnect the radio from the computer,
wait a few seconds, then reconnect. Contact GRE
Support if the problem persists.
appear. Mass storage device mode is disabled
when the scanner is connected to a computer and
scanning. Disconnect the radio from the computer,
wait a few seconds, then reconnect. Contact GRE
Support if the problem persists.
03-08
Unknown
MicroSD card
read/write error
MicroSD card
read/write error
Reinsert the MicroSD card to ensure it is fully
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
inserted in locked in the MicroSD slot. If
necessary, reformat the MicroSD card using the
PC Application “Prepare SD Card for use” option.
Replace the MicroSD card if the problem persists.
PSR-800 User Manual!
Page 76