SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO. LTD. AICDSCALE1 Manual De Usuario

36

Storage

If you stand on the scale and “Lo” appears on the display 

instead of the measurements, the batteries are no lon-

ger supplying sufficient power.
If you stand on the scale and nothing appears on the 

display, the batteries are empty. To change the batteries, 

proceed as follows:
1.  Place the scale on a soft base with the bottom facing 

up.

2.  Open the battery compartment 

4

 (see 

fig. B).

3.  Take the batteries 

3

 out of the battery 

compartment.

4.  Insert new batteries in the battery compartment. Use 

batteries of the same type.  

The polarity is correct if the negative poles of the 

batteries are lined up with the corresponding spring 

contacts in the battery compartment.

5.  Close the battery compartment.
6.  Turn the scale over.

The reading “0.0” will appear on the display.

7.  If nothing appears on the display, remove the batter-

ies and insert them again.

If you do not use the scale for a prolonged period of 

time, please observe the following notes: