GENIUS TOY TAIWAN CO. LTD GC258006 Manual De Usuario

1.  Press the notes command icon and the sound

programming window appears (J).

2.  In the sound programming window, you can

create a command to make sounds. You can
choose the pitch (Do, Re, Mi, Fa, Sol, La, Si, and
Do) and the duration (0.5 to 5 seconds) for each
note command.

3.  Press the green check mark bu+on and the note

block (K) appears in the program segment.

In this way, you can program a simple melody 
with multiple note blocks that will play when the 
program segment runs.

1.  The last command option is to add a pause, or

rest, to the program. Press the rest command icon
and the rest programming window appears (L).
You can choose the duration (0.5 to 5 seconds) of
the pause in the program. Press the green check
mark bu+on and the rest block (M) is added to the
program segment.

Following the previous instructions for adding 
commands, you can now go and write programs for 
all of the segments. You can think of the different 
actions you want your robot to perform when the 
ultrasonic sensor reads objects at different 
distances in front of it.

Don’t be afraid to try a lot of different ideas and 
play around with different combinations of 
command blocks in different distance range 
segments.

To delete a command block, press the block you 
want to delete to open its programming window. 
Then press the trash bu+on (N) in the bo+om corner. 

J

L

K

M

N

Robotics Smart Machines Manual Inside.indd   11

6/1/15   2:43 PM