APC AR4000MV Prospecto
>
Physical capacity:
Available Height x Width x Depth
570 x 500 x 700 mm
22.5 x 19.7 x 27.5 inches
(Fits 2 side by side tower servers)
Converts to 12U rack using the
accessory: AR4000MV12U
Rack depth 600 mm (23.6”)
570 x 500 x 700 mm
22.5 x 19.7 x 27.5 inches
(Fits 2 side by side tower servers)
Converts to 12U rack using the
accessory: AR4000MV12U
Rack depth 600 mm (23.6”)
>
Integrated power strip:
3 outlets IEC
+ 3 NEMA cables
+ 3 NEMA cables
>
Max thermal load :
800W
>
Noise reduction:
18.5dB
>
Power consumption:
30 watts
>
Weight:
80kg / 176 lbs
>
Equipment weight max:
85kg / 187 lbs
>
Dimensions HxWxD:
700 x 690 x 930 mm
27.5 x 27.2 x 41.5 in
27.5 x 27.2 x 41.5 in
Standard Features
Noise reduction:
18.5 dB broadband noise reduction, measured 1.0 m
/ 39” in front of the enclosure (HP and Dell servers
were used as noise source in noise reduction
measurements)
/ 39” in front of the enclosure (HP and Dell servers
were used as noise source in noise reduction
measurements)
Ventilation system:
The ultra-low-noise exhaust fan module has a
800W maximum recommended total thermal load
800W maximum recommended total thermal load
Mobility:
4 x office style castor- wheels for ease of portability,
the CX Mini can be readily moved as required.
the CX Mini can be readily moved as required.
Access:
A detachable and lockable rear panel ensures
security and quick access to the equipment inside.
The power strip is removable to allow installation
through the rear, without powering-off equipment.
security and quick access to the equipment inside.
The power strip is removable to allow installation
through the rear, without powering-off equipment.
Cable management:
Two innovative cable-ports allow passage into and
out of the enclosure for power and networking
cables. The main cable port takes up to 30 cables
and the upper cable port provides enough room to
connect a number of devices such as keyboard,
monitor, mouse or other peripherals.
out of the enclosure for power and networking
cables. The main cable port takes up to 30 cables
and the upper cable port provides enough room to
connect a number of devices such as keyboard,
monitor, mouse or other peripherals.
Grounding:
All equipment installed within a NetShelter CX
should have conventional grounding via power
cables, but unlike conventional metal-case cabinets,
the NetShelter CX has no requirement for additional
grounding in the form of ground strapping or pipe
earthing etc. The enclosure shell is constructed
entirely from non-conductive materials and the rack
is completely isolated from outside contact.
should have conventional grounding via power
cables, but unlike conventional metal-case cabinets,
the NetShelter CX has no requirement for additional
grounding in the form of ground strapping or pipe
earthing etc. The enclosure shell is constructed
entirely from non-conductive materials and the rack
is completely isolated from outside contact.
Floor space requirements:
Enclosures are designed to be placed with their back
directly against a wall. Clearance of 200mm / 8” on
both sides of the cabinet is essential for normal
operation.
directly against a wall. Clearance of 200mm / 8” on
both sides of the cabinet is essential for normal
operation.
Door locking:
Key operated tamper-proof lock
Warranty:
2 years
A soundproofed ‘Server Room in a Box’ which
allows for IT deployment wherever and whenever it
is needed, saving space, cost and deployment time.
allows for IT deployment wherever and whenever it
is needed, saving space, cost and deployment time.
NetShelter
™
CX Mini
It comes equipped with ventilation, soundproofing and a basic
power strip. It can be stowed under a desk, or if you prefer, it has
a durable worktop which can be utilized for other office
equipment, such as a printer or fax machine.
power strip. It can be stowed under a desk, or if you prefer, it has
a durable worktop which can be utilized for other office
equipment, such as a printer or fax machine.
The CX blends discretely into any office due to its furniture-like
appearance, creating an anonymous ,secure environment for
your IT.
appearance, creating an anonymous ,secure environment for
your IT.
A host of installer friendly features ensure quick and easy
deployment and the CX comes almost fully built, with only the
wheels and recirculation-guard requiring simple fitting.
deployment and the CX comes almost fully built, with only the
wheels and recirculation-guard requiring simple fitting.
Model AR4000MV
The CX „Mini‟ is a purpose built
tower-server enclosure aimed at
small, non-IT spaces such as Home
Office, School, AV, Small Office and
Remote Office environments.
tower-server enclosure aimed at
small, non-IT spaces such as Home
Office, School, AV, Small Office and
Remote Office environments.
Technical Specifications