Altronix AL1024ULMR Prospecto
This multi-output access control power supply/charger is specifically designed
for use with access control systems and accessories. These units convert a
115VAC / 60Hz input into five (5) individually protected Class 2 Rated power
limited 24VDC outputs (see specifications). Each output will route power to
a variety of access control hardware devices including Mag Locks, Electric
Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-
Safe and Fail-Secure modes. Controlled trigger input is achieved through nor-
mally open (N.O.) or normally closed (N.C.) supervised input or the polarity
reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output
relay enables HVAC Shutdown, Elevator Recall or may be used to trigger aux-
iliary devices.
for use with access control systems and accessories. These units convert a
115VAC / 60Hz input into five (5) individually protected Class 2 Rated power
limited 24VDC outputs (see specifications). Each output will route power to
a variety of access control hardware devices including Mag Locks, Electric
Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-
Safe and Fail-Secure modes. Controlled trigger input is achieved through nor-
mally open (N.O.) or normally closed (N.C.) supervised input or the polarity
reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output
relay enables HVAC Shutdown, Elevator Recall or may be used to trigger aux-
iliary devices.
• 24VDC outputs.
• Access Control applications: 24VDC @ 10 amp,
Fire Alarm applications: 24VDC @ 8 amp supply
current with 10 amp during alarm.
• Input 115VAC input at 60 Hz. rated @ 4.4 amp.
• Fire Alarm Panel or Access Control System trigger
inputs. N.O. or N.C. supervised trigger input and
polarity reversal trigger input.
• Five (5) individual Class 2 Rated power
limited outputs rated @ 2.5 amp.
• Current limit is 24VDC @ 2 amp per output.
• Filtered and electronically regulated outputs.
• Thermal and short circuit protection with auto reset.
• Overload protection.
• Output relay energizes when unit is triggered
(form “C” contact rated 1 amp @ 28VDC).
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails (zero voltage drop).
• Maximum charge current 3.6 amp.
• Access Control applications: 24VDC @ 10 amp,
Fire Alarm applications: 24VDC @ 8 amp supply
current with 10 amp during alarm.
• Input 115VAC input at 60 Hz. rated @ 4.4 amp.
• Fire Alarm Panel or Access Control System trigger
inputs. N.O. or N.C. supervised trigger input and
polarity reversal trigger input.
• Five (5) individual Class 2 Rated power
limited outputs rated @ 2.5 amp.
• Current limit is 24VDC @ 2 amp per output.
• Filtered and electronically regulated outputs.
• Thermal and short circuit protection with auto reset.
• Overload protection.
• Output relay energizes when unit is triggered
(form “C” contact rated 1 amp @ 28VDC).
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails (zero voltage drop).
• Maximum charge current 3.6 amp.
• Enclosure accommodates up to two (2)
12VDC/12AH batteries.
• DC output LED indicator.
• LEDs indicate condition of power outputs.
• Power & input trigger LEDs.
• AC fail supervision (form “C” contact).
• Low battery supervision (form “C” contact).
• Battery presence supervision (form “C” contact).
• Power fail supervision relay (form “C” contact rated
1 amp @ 28VDC).
• Power supply is complete with enclosure, cam lock,
transformer and battery leads.
• Enclosure:
- Combination knockouts re 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH
batteries.
12VDC/12AH batteries.
• DC output LED indicator.
• LEDs indicate condition of power outputs.
• Power & input trigger LEDs.
• AC fail supervision (form “C” contact).
• Low battery supervision (form “C” contact).
• Battery presence supervision (form “C” contact).
• Power fail supervision relay (form “C” contact rated
1 amp @ 28VDC).
• Power supply is complete with enclosure, cam lock,
transformer and battery leads.
• Enclosure:
- Combination knockouts re 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH
batteries.
AL1024ULM weights (approximate):
Product weight:11.4 lbs.
Shipping weight: 12.7 lbs.
Shipping weight: 12.7 lbs.
AL1024ULM Multi-Output Access Control
Power Supply/Charger
Rev. DSAL1024ULM_E10L
Overview
Specifications
Agency Approvals
UL Listed for Access Control Systems Units
(UL 294).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
(UL 294).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
CUL Listed - CSA Standard C22.2
No.205-M1983 Signal Equipment.
No.205-M1983 Signal Equipment.
CSFM - California State Fire
Marshal Approved.