Altronix AL400ULMR Prospecto
• These multi-output access control power supply/chargers are specifically
designed for use with access control systems and accessories. These units
convert a 115VAC / 60Hz input into five (5) individually protected
Class 2 Rated power limited 12VDC or 24VDC outputs (see specifications).
Each output will route power to a variety of access control hardware devices
including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These
outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled
trigger input is achieved through normally open (N.O.) or normally closed
(N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm
Control Panel). A form “C” dry output relay enables HVAC Shutdown,
Elevator Recall or may be used to trigger auxiliary devices.
convert a 115VAC / 60Hz input into five (5) individually protected
Class 2 Rated power limited 12VDC or 24VDC outputs (see specifications).
Each output will route power to a variety of access control hardware devices
including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These
outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled
trigger input is achieved through normally open (N.O.) or normally closed
(N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm
Control Panel). A form “C” dry output relay enables HVAC Shutdown,
Elevator Recall or may be used to trigger auxiliary devices.
• 12VDC or 24VDC selectable output.
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Five (5) individual Class 2 Rated power
• 12VDC @ 4 amp or 24VDC @ 3 amp supply current.
• Five (5) individual Class 2 Rated power
limited outputs rated @ 2.5 amp.
• Current limit is 12VDC or 24VDC @ 2 amp
per output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Fire Alarm Panel or Access Control System trigger
• Input fuse rated @ 3.5 amp/250V.
• Fire Alarm Panel or Access Control System trigger
inputs. N.O. or N.C. supervised trigger input and
polarity reversal trigger input.
polarity reversal trigger input.
• Output relay energizes when unit is triggered
(form “C” contact rated 1 amp @ 28VDC).
• Power fail supervision relay (form “C” contact rated
1 amp @ 28VDC).
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators
(power supply board).
• Red LEDs indicate condition of power outputs
(multi-output board).
• Power & input trigger LEDs (multi-output board).
• Enclosure:
• Enclosure:
- Combination knockouts re 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/7AH batteries.
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight:
- AL400ULM: 7.7 lbs.
- AL400ULMR: 7.8 lbs.
- AL400ULMR: 7.8 lbs.
• Shipping weight:
- AL400ULM: 8.7 lbs.
- AL400ULMR: 7.7 lbs.
- AL400ULMR: 7.7 lbs.
AL400ULM(R) Multi-Output Access Control
Power Supply/Charger
Power Supply/Charger
Rev. DSAL400ULM - L05F
Overview
Specifications
UL Listed for Access Control Systems Units
(UL 294).
UL Listed Standard for Power Supplies for Use
with Burglar-Alarm System Units (UL 603).
UL Listed Hospital Signaling and Nurse Call
Equipment (UL 1069).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
(UL 294).
UL Listed Standard for Power Supplies for Use
with Burglar-Alarm System Units (UL 603).
UL Listed Hospital Signaling and Nurse Call
Equipment (UL 1069).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
CUL Listed - CSA Standard C22.2
No.205-M1983 Signal Equipment.
No.205-M1983 Signal Equipment.
Agency Approvals
MEA - NYC Department of
Buildings Approved.
CSFM - California State Fire
Marshal Approved.
AL400ULM
• Grey enclosure.
AL400ULMR
• Red enclosure.