LaCie Dupli Disc DVD 125 16x 108655 Manual

page 14

Setting up your LaCie Dupli Disc DVD125 is a snap – just follow these basic steps:

1) Set-up your LaCie Dupli Disc DVD125 on a flat surface, in an appropriate place.

2) Check the voltage setting at the back panel of your duplicator.

3) Connect the provided AC cable to the back of the LaCie Dupli Disc DVD125 and the other end to

a properly grounded outlet.

4) Turn on the LaCie Dupli Disc DVD125 using the On/Off switch located on the front of the device.

Once the LaCie Dupli Disc DVD125 is turned on, the following messages will appear:

Before connecting your LaCie Duplicator to the main power source and switching it on, please check the

voltage setting located at the back panel of this device next to the power socket. You should use a screwdriver to
change the voltage setting if it differs from that of your mains power source.