LaCie Dupli Disc DVD 125 16x 108655 Manual

page 18

The LaCie Dupli Disc DVD125 is able to duplicate either CD or DVD media.

The Copy mode allows you to copy data directly from a source DVD/CD disc onto a blank DVD/CD disc. Before copying,
make sure that the source disc is placed into the DVD-ROM drive. After the initialization process has finished, check the Dupli
Disc DVD125 displays the following screen:

or press the            button until the function 1. Copy is displayed.

1. Place a source DVD or CD disc into the DVD-ROM drive.

2. Place one DVD blank media (or a blank CD if the source media is a CD) into the DVDRW drive(s). You can use from 1 to
5 DVDRW drive(s), depending on the number of copies you would like to get.

3. After the drives have detected the source media, press the            button to start the duplication.

4. The Display screen will show similar information during the copy process:

*If the source disc is a CD, it displays:

= percentage of completion. This number will increase during the duplication until 100%.

= total size of your source media. "MB" stands for Mega Bytes.

= duration of time for this duplication. It will decrease during the duplication.

You can cancel a function at almost anytime by pressing the           button for 2 seconds.