Maxtor ELX8-60 Manual De Usuario
ELX8 -60
INSTALLATION AND CONNECTION
40
2003. 08. 13 (v 1.0)
Rugged CCTV
15.2. Configuring ELX8-60 Network Information
The following description is on based on Ethernet connection. For more detailed information on the
Network Settings Page, please refer to “ELX8 -60 OSD User’s Guide”.
(1) Press [MENU] button.
(2) Select “System ” using the [
/
] buttons and press [ENTER].
(3) Select “Network” using the [ / ] buttons and press [ENTER].
(4) Select “IP Addr ” using the [ / ] buttons and press [ENTER].
(5) Press [EXIT] button after entering IP address in the dialogue box.
(6) Select “Net Mask ” using the [ / ] buttons and press [ENTER].
(7) Press [EXIT] button after entering Net Mask in the dialogue box.
(8) Select “Gateway ” using the [ / ] buttons and press [ENTER].
(9) Press [EXIT] button after entering Gateway in the dialogue box.
(10) Select “DNS” using the [ / ] buttons and press [ENTER].
(11) Press [EXIT] button after entering DNS in the dialogue box.
(12) Press [EXIT] button to exit the page .