Kingston Technology 1GB(2 x 512MB), 400MHZ, DDR RAM,DIMM, ECC-REG, CL3 (3-3-3) KVR400X72RC3AK2/1G Hoja De Datos
Los códigos de productos
KVR400X72RC3AK2/1G
Memory Module Specification
DESCRIPTION:
ValueRAM's KVR400X72RC3AK2/1G is a kit of two 64M x 72-bit (512MB) DDR400 CL3
SDRAM (Synchronous DRAM) Registered ECC memory modules. Total kit capacity is 1GB
(1024MB). The components on each module include eighteen 64M x 4-bit (16M x 4-Bit x 4
bank) DDR400 SDRAM in FBGA packages and three 16-bit drivers in TSSOP packages. Each
184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical
specifications are as follows:
SDRAM (Synchronous DRAM) Registered ECC memory modules. Total kit capacity is 1GB
(1024MB). The components on each module include eighteen 64M x 4-bit (16M x 4-Bit x 4
bank) DDR400 SDRAM in FBGA packages and three 16-bit drivers in TSSOP packages. Each
184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical
specifications are as follows:
FEATURES:
Clock Cycle Time (tCK)
5ns (min.) / 10ns (max.)
Row Cycle Time (t
RC
)
55ns (min.)
Refresh Row Cycle Time (tRFC)
70ns (min.)
Row Active Time (tRAS)
40ns (min.) / 70,000ns (max.)
Single Power Supply of
+2.6V (+/- .1V)
Power (IDD0)
6.162 W operating
UL Rating
94 V - 0
Document No. VALUERAM0350-001.B00
07/14/04
Figure 1: KVR400X72RC3AK2/1G 184-Pin DIMM Kit
KVR400X72RC3AK2/1G
1GB (512MB 64M x 72-Bit x 2 pcs.) DDR400
Registered CL3 ECC 184-Pin DIMM Kit
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.200" (30.48mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.200" (30.48mm).