Omnitron iConverter STM1 8899S-0-D Hoja De Datos
Los códigos de productos
8899S-0-D
iConverter
iConverter
®
Converts STM-1 or OC-3 75Ω coax to fiber
■
Features standard STM-1e coax interface with
■
mini-BNC connectors
Adapter cables convert to standard BNC type
■
connectors
Features standard STM-1 (or OC-3) optical interface
■
Standalone or plug-in module
■
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
Managed or unmanaged
■
Per port LED status display
■
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
STM 1
STM-1/OC-3 Coax to Fiber Media Converter
The iConverter STM 1 copper to fiber media converter converts
155.52Mbps STM-1e coax to STM-1 fiber. It can be used in
Telecom or Enterprise applications where STM-1 or OC-3
transport is required beyond the maximum distance of copper
(approximately 70m).
The copper port provides two mini-BNC 75Ω coax connectors
The copper port provides two mini-BNC 75Ω coax connectors
that comply with the ITU-T G.703 and Telcordia GR-253
standards for CMI coded 155.52Mbps electrical interfaces.
Adapter cables are included to convert the mini-BNC
connectors to standard BNC type connectors.
The fiber port accepts any standard, MSA compatible
The fiber port accepts any standard, MSA compatible
155.52Mbps Small Form Pluggable (SFP). Please refer to
Omnitron’s SFP data sheet for standard STM-1/OC-3 and
CWDM wavelength SFPs for ordering information.
The iConverter STM 1 media converter is available as a
The iConverter STM 1 media converter is available as a
compact, unmanaged standalone unit, or as a chassis managed
plug-in module. The hot-swappable plug-in module can be
mounted in a 19 or 5-Module chassis with any combination of
redundant AC and DC power supplies. It can also be mounted
in a 2-Module AC or DC powered chassis, or in a 1-Module
chassis with AC or DC power input.
The standalone unit is wall-mountable. It is DC powered and is
The standalone unit is wall-mountable. It is DC powered and is
available with an external AC/DC power adapter or a terminal
connector for direct DC power.
The iConverter Multi-Service Platform consists of Network
Interface Devices, T1/E1 multiplexers, CWDM multiplexers
and managed media converters that combine to deliver
Carrier Ethernet and TDM services over fiber or CWDM
wavelengths. This flexible architecture supports a wide variety
of configurations for scalable and reliable fiber connectivity in
Service Provider and Enterprise networks.
Key Features
* Fiber SFP transceiver not included