Philips Blu-ray Disc player BDP3306 BDP3306/F7 Manual De Usuario

EN

EN - 11

* The unit can also be turned on by pressing these 

buttons.

• Place a disc after opening the disc tray.

• Receives signals from your remote control so that 

you can control the unit from a distance.

• Press to open or close the disc tray.

• Press to stop playback.

• Press to start or resume playback.
• This button lights up during playback.

Q (standby/on) button
• Press to turn on the unit, or to switch the unit into 

standby mode. (To completely turn off the unit, you 
must unplug the AC power cord.)

• Press and hold for 10 seconds to shut down the unit.
• This button lights up when the power is on and turns 

off when the unit is in standby mode.

• Insert an SD card and play back the contents in it.

•

Due to new ENERGY STAR® requirements, this unit 
will automatically enter standby mode after 25 minutes 
of inactivity.

• Connect to a standard AC outlet to supply power to 

this unit.

• Unplug this cord from the AC outlet to completely 

turn off the unit.

• Use to connect to network provisioning equipment 

such as a router or a modem with a LAN cable.

• Use to connect to a display with an HDMI compatible 

port with an HDMI cable.

• Use to connect a TV monitor, an AV receiver / 

amplifier or to another device with an audio cable.

• Use to connect an AV receiver / amplifier,              

Dolby Digital / DTS decoder or to another device 
with a digital audio coaxial input jack with a digital 
audio coaxial cable.

• Use to connect a TV monitor, an AV receiver / 

amplifier or to another device with a video cable.

•

Do not touch the inner pins of the jacks on the rear 
panel. Electrostatic discharge may cause permanent 
damage to the unit.

•

This unit does not have an RF modulator.