Philips Blu-ray Disc player BDP3306 BDP3306/F7 Manual De Usuario

EN

EN - 41

•

When the HDMI OUT jack is outputting the video in 
1080p/24, picture will not be output from the VIDEO 
OUT jack.

•

When connected to an HDCP incompatible display 
device, the picture will not be displayed properly.

•

The audio signals from the HDMI OUT jack (including 
the sampling frequency, the number of channels and bit 
length) may be limited by the device that is connected.

•

Among the display device(s) that support HDMI, some 
do not support audio output (for example, projectors). 
While connected to a device such as a projector, audio 
will not be output from the HDMI OUT jack.

•

When this unit’s HDMI OUT jack is connected to a 
DVI-D compatible display device(s) (HDCP compatible) 
with an HDMI-DVI converter cable, the signals are 
output in digital RGB.

•

When you make a selection, the TV monitor 
temporarily goes blank and then comes back again. If it 
does not come back, press [HDMI] repeatedly to 
change the resolution or press and hold  [B (play)] 
on the front panel for 5 seconds to change the setting 
back to its default.

Set up network connection settings in order to use        
BD-Live™, Netflix / Film Fresh / Blockbuster /  VUDU / 
Pandora or network update function.

䡲 Connection Test
After you enable a network connection or change the 
network settings, always perform the connection test to 
check if the connection is correctly made.
1. Use [K / L / s / B] to select “Setup” in the home 

menu, then press [OK].

2. Use [K / L] to select “Network Setup”, then press 

[OK].

3. Use [K / L] to select “Network Installation”, then 

press [OK].

4. Use [K / L] to select “Connection Test”, then press 

[OK].
• Connection test will start automatically and the test 

result will appear right after the connection test 
finishes.

- “Connecting...” : The test is in progress.
- “Pass” : Connection test is successfully completed.
- “Failed” : Connection test failed. Check the 

connection settings.

5. Press [OK] to go back to the setup menu, or press 

(home)] to exit.

To play back the digital video images of a BD-video or 
DVD-video via an HDMI connection, it is necessary that 
both the player and the display device (or an AV    
receiver / amplifier) support a copyright protection 
system called HDCP (high-bandwidth digital content 
protection system). HDCP is copy protection technology 
that comprises data encryption and authentication of the 
connected AV device. This unit supports HDCP. Please 
read the operating instructions of your display device (or 
an AV receiver / amplifier) for more information.

A “Setup” A “Network Setup” A