Philips 40HFL2082D 40HFL2082D/F7 Manual De Usuario
Los códigos de productos
40HFL2082D/F7
P&F USA
Philips Hospitality TV
Alpharetta, GA, USA
Philips Hospitality TV
Alpharetta, GA, USA
32HFL2082D/F7
Commercial Mode Setup
Page 14 of 14
Version: 1.1
2010-12-28
© Koninklijke Philips Electronics N. V., 2010
All rights reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.
All rights reserved. Reproduction in whole or in part is
prohibited without the written consent of the copyright owner.
4. Cloning Process
A. Set up the Master TV
1. Use the guest remote control to navigate to and Autoprogram the TV to acquire the channel
lineup: MENU – SETUP – AUTOPROGRAM (select cable or antenna as applicable).
Note: The TV must be in Normal TV Mode in order to access the setup menu to autoprogram
the TV. If the Setup item in the menu is grayed out, then the TV is in PBS Mode and you must
first Change the mode to Normal TV Mode (ref section 2 to switch the mode.)
Note: The TV must be in Normal TV Mode in order to access the setup menu to autoprogram
the TV. If the Setup item in the menu is grayed out, then the TV is in PBS Mode and you must
first Change the mode to Normal TV Mode (ref section 2 to switch the mode.)
2. Switch the TV back to PBS Mode (ref section 2)
3. Enter the setup menu per section 3, and set up all the commercial TV functions as described in
3. Enter the setup menu per section 3, and set up all the commercial TV functions as described in
sections 3.A and 3.B of this manual. Be sure to create and install the welcome message (ref
section 3.A.iv, v) if that functionality is desired.
section 3.A.iv, v) if that functionality is desired.
4. Verify the TV functions as expected.
B. Create the Clonefile from the Master TV to USB
1. Ensure the TV is in PBS Mode so that when these settings are cloned to other TVs, it will put
them into PBS mode. (The easiest way to check is to hit the menu button on the guest remote –
if the setup function is grayed out, then the TV is in PBS Mode.)
if the setup function is grayed out, then the TV is in PBS Mode.)
2. Enter the setup menu per section 3, and export the clonefile data from the TV to a USB
thumbdrive as described in section 3.C of this manual: TV to USB.
3. (Ensure the welcome.txt file is also on the same USB thumbdrive if a welcome message is
desired.)
C. USB clone settings to all other TVs
1. Enter the setup menu per section 3, and import the clonefile data from the USB thumbdrive
created in the previous step (4.B above) into the destination TV as described in section 3.D of
this manual.
this manual.
2. If Welcome Message functionality is desired, then also import the welcome message from the
USB thumbdrive into the destination TV as described in section 3.A.v of this manual.