Hitachi CPX2530WN Manual De Usuario

CP-X2530WN LCD Projector

By using a USB memory stick or other storage device, you can 
use the projector without a computer. Menus are easy to see 
with a thumbnail display. There is also a slideshow function. This 
feature also supports the following file types: JPG, PNG, BMP, 
GIF, AVI, and MOV — frame rate is under 12fps 640 x 480.

PIN lock protection can limit projector users. MyScreen PIN 
lock keeps captured images on the startup screen. Users can 
set any name logo to MyScreen, clearly identifying ownership. 
MyText provides the ability to write text on the startup screen 
such as model name, serial number or location.

PJMessenger function allows you to send and display text 
messages and audio alerts on your networked projectors. It 
is an easy and efficient way to send announcements out to 
multiple units.

Hitachi’s suite of networking software allows you to easily 
send content directly from your PC to the projector via your 
LAN connection.

A label is affixed to side of projector to more easily access 
and read the model name, serial number and MAC address 
while mounted in ceiling use. This is a convenience for 
installers, end users and auditors for instant accessibility. 

You can use a wireless network by connecting the projector 
to a computer using the optional USB wireless adapter part 
number USBWL11N. The adapter supports IEEE802.11b/g 
and the latest 11n.

900 Hitachi Way, Chula Vista, CA  91914 

Toll Free: 1.800.HITACHI 

•

 Email: dmd.info@hal.hitachi.com   

Web: hitachi-america.us/projectors

HI0158_Rev.2-05/13 WEB 
All specifications subject to change without notice.
3LCD and the 3LCD logo are registered trademarks of the Seiko Epson Corporation.
©2013 Hitachi America, Ltd. All Rights Reserved.

*   Actual filter life will vary by individual filter and based on environmental conditions, selected operating mode, user settings 

and usage. Hours of average filter life specified are not guaranteed and do not constitute part of the product warranty.

**  Actual lamp life will vary by individual lamp and based on environmental conditions, selected operating mode, user 

settings and usage. Hours of average lamp life specified are not guaranteed and do not constitute part of the product or 

lamp warranty. Lamp brightness decreases over time.

Simply plug and play using the USB port instead of the  
15-pin D-sub VGA cable. 

Embedded networking gives you the ability 
to manage and control multiple projectors 
over your LAN. Features include scheduling 
of events, centralized reporting, image 
transfer and e-mail alerts for reactive and 
routine maintenance.

Copy configuration settings from one projector to others of the 
same model via USB memory. Cloning can save almost all PJ 
settings such as gamma and keystone via USB memory.

Automatically changes the brightness of the lamp according to 
the brightness level of the screen. Also, automatically changes 
the brightness of the lamp if there is no change in the screen 
image. Using ImageCare technology, these features give 
optimal picture performance with maximum energy savings. 

Users can name input sources in simple language instead of 
factory default name. 

A microphone can be used via the jack located on the 
input panel. Allows for more dynamic presentations even in 
standby mode. 

ImageCare is a lamp power control function that combines 
optimal picture performance with maximum energy savings 
by decreasing energy usage, improving contrast ratio and 
lengthening lamp life. The result is a lower total cost of 
ownership and decreased maintenance cost.

The optional Hitachi wireless tablet and pen allows you to 
engage your audience by annotating over images shown on 
the projector.