APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

Use the Wireless Sensor Discovery task to specify the discovery settings that will be used when detecting 
the presence of THS-100 Wireless Temperature/Humidity Sensors.

To change the Wireless Sensor Discovery settings, type the new values in the appropriate fields. When 
you are finished, click OK to save any changes to the appliance. Click Cancel to close this window 
without saving any changes.

Wireless sensors can be used only in conjunction with a Wireless Receiver 120. 
This task will not be available for use unless a Wireless Receiver 120 has been 
connected to your appliance and the serial port has the receiver assigned to it 
using the Serial Devices task.

Discovery mode 

This setting determines the circumstances under which new 
wireless sensors will be discovered and added to the list of 
sensors available from the Wireless Receiver 120. There are two 
discovery mode settings available: 
• Any: Any detected wireless sensor will automatically be added 

to the list of wireless sensors.

• None: No additional wireless sensors will be discovered.

Timeout (minutes) 

The number of seconds that can pass after data has been 
received from a wireless sensor before, if no additional data is 
received, the sensor is considered to be offline. The default 
setting is 10 minutes.

Serial numbers to exclude 

If desired, use the Add button to add to this list the serial 
numbers of wireless sensors that you want to ignore.