APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

To configure your appliance you use network attached storage for extended storage purposes:

1. Select NFS Mount from the Select Storage Type pane and then click Next.

2. The NFS Settings pane appears. This pane features the following fields and controls:

3. Once you’ve filled in all of the required information, click Next to continue.

4. The Select Action pane appears. Two selections are available:

– Use network extended storage: Configure the appliance to use the specified NFS mount 

without clearing the share of data first. 

– Initialize: Clears all existing data from the NFS mount and then configures the appliance to use 

the NFS mount.

5. Select the operation you wish to perform and then click OK.

To remove a previously added and configured NAS or Extended Storage System from your appliance:

1. Start the External Storage task and then click Stop Using. The following confirmation message 

appears: “Remove configured drive? This will cause the appliance to reboot.”

2. Click OK to remove the Extended Storage System. Your appliance will restart automatically.

3. If you are removing an Extended Storage System, power off your appliance. Then, unplug the 

Extended Storage System USB cables from the appliance and power your appliance on again. 

Use the IP Filter task to limit access to your appliance to users connecting from specified IP addresses or 
IP address ranges. By default, clients from any IP address can attempt to access your appliance. While 
access to the appliance is granted only when appropriate user account IDs and passwords are provided, IP 
Filtering provides additional security by preventing connections from IP addresses that do not meet the IP 
filter criteria you specify.

If no IP Filter criteria are specified, then connections from all IP addresses are permitted. 

Remote Hostname/IP

The hostname or IP address of the NAS.

Remote Mount

The name of the NFS mount on the NAS.

Subdirectory (optional)

The subdirectory in the NFS mount that will be used to store 
data. If no subdirectory is specified, data will be stored in the 
root directory of the mount.

Authenticate using UID check box

check this check box to authenticate all appliance access to the 
mount using UID. If checked, be sure to specify the correct UID 
value as well.

Use all available space check box

If checked, the appliance will not delete data from the mount 
until all available space on the mount has been exhausted. If 
unchecked, use the Limit space to (MB) and Allocation Unit 
controls to specify how much space on the mount will be 
allocated for use by the appliance.