APC NetBotz 320 Rack Appliance NBRK0320E Manual De Usuario

Use the Network Interface task to view or change the NetBotz appliance network settings for you 
appliance’s network interfaces. By default there is a single network interface: the Ethernet Interface for 
the appliance’s built-in Ethernet connection. If you have not installed additional network interfaces to 
your appliance and you start this task the Edit Network Interface window will open. If you have installed 
a supported wireless network PC Card then you will first be presented with a selection list containing the 
names of the network interfaces available for configuration on your appliance. 

When you select an interface and then click Edit the Edit Network Interfaces window opens, with settings 
specific to the selected network interface available for editing.

If you are editing the Ethernet network interface configuration, the following controls and fields appear in 
the Edit Network Interface window:

Enable Interface

Check this check box to enable this network interface.

Configure via DHCP radio button

Select this radio button to configure the selected network 
interface to use a DHCP server on the network to obtain its IP 
address, subnet mask, and gateway server settings. If you are 
using DHCP, the time remaining until the appliance will need to 
renew its IP address lease is displayed beneath this radio button.

Configure using these settings 
radio button

Select this radio button if you want to specify the IP address, 
subnet mask, and gateway address values for the selected 
network interface.